{"title":"J\u0026L","description":null,"products":[{"product_id":"j-l-2019-2024-ford-ranger-2-3l-driver-side-oil-separator-3-0-clear-anodized","title":"J\u0026L Driver Side Oil Separator 3.0 Clear Anodized - 2019-2023 Ford Ranger 2.3L","description":"\u003ch1\u003eJ\u0026amp;L 3.0 Oil Separator (Driver Side) – Ford Ranger 2.3L\u003c\/h1\u003e\n\u003ch3\u003e2019–2023 Ford Ranger 2.3L EcoBoost | Driver Side Catch Can | Clear Anodized | SKU: 3037D-C\u003c\/h3\u003e\n\u003cp\u003eProtect your Ranger’s engine from harmful blow-by with the \u003cstrong\u003eJ\u0026amp;L 3.0 Oil Separator (3037D-C)\u003c\/strong\u003e. Designed specifically for the \u003cstrong\u003e2019–2023 Ford Ranger 2.3L EcoBoost\u003c\/strong\u003e, this \u003cstrong\u003edriver-side oil separator\u003c\/strong\u003e captures oil vapors before they can contaminate your intake system.\u003c\/p\u003e\n\u003cp\u003eDuring normal engine operation, crankcase pressure forces oil vapors back through the intake tract, leading to carbon buildup and reduced efficiency. The \u003cstrong\u003eJ\u0026amp;L separator traps these contaminants\u003c\/strong\u003e, helping to maintain engine cleanliness, performance, and long-term reliability.\u003c\/p\u003e\n\u003cp\u003eConstructed from \u003cstrong\u003esolid billet aluminum\u003c\/strong\u003e, this unit features a \u003cstrong\u003emulti-stage internal filtration system\u003c\/strong\u003e that captures even fine oil particles and deposits them into the reservoir for easy removal. \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDirect fit for 2019–2023 Ford Ranger 2.3L EcoBoost\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSKU: 3037D-C\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDriver side oil separator (clean side)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eCaptures oil vapors before entering intake\u003c\/li\u003e\n\u003cli\u003eReduces carbon buildup on intake valves\u003c\/li\u003e\n\u003cli\u003eSolid billet aluminum construction\u003c\/li\u003e\n\u003cli\u003eMulti-stage filtration system for maximum efficiency\u003c\/li\u003e\n\u003cli\u003e3 oz capacity reservoir\u003c\/li\u003e\n\u003cli\u003eClear anodized (satin) finish\u003c\/li\u003e\n\u003cli\u003eImproves long-term engine performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Fitment Note (IMPORTANT)\u003c\/h2\u003e\n\u003cp\u003e❗ Fits \u003cstrong\u003e2019–2023 Ford Ranger 2.3L EcoBoost ONLY\u003c\/strong\u003e\u003cbr\u003e❗ \u003cstrong\u003eDriver side (clean side) separator\u003c\/strong\u003e\u003cbr\u003e❗ \u003cstrong\u003eWill NOT fit 2.7L or Ranger Raptor models\u003c\/strong\u003e\u003cbr\u003e❗ Designed for EcoBoost turbocharged applications only\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eEngine Protection\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrevents oil vapor contamination in intake system\u003c\/li\u003e\n\u003cli\u003eReduces carbon buildup on intake valves\u003c\/li\u003e\n\u003cli\u003eHelps maintain engine efficiency and longevity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e👉 Keep your intake system clean\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eImproved Performance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaintains proper air\/fuel mixture\u003c\/li\u003e\n\u003cli\u003eHelps preserve horsepower and throttle response\u003c\/li\u003e\n\u003cli\u003eReduces oil dilution in combustion process\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e👉 Protect your performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eHigh-Quality Construction\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBillet aluminum canister for durability\u003c\/li\u003e\n\u003cli\u003eMulti-stage internal filtration system\u003c\/li\u003e\n\u003cli\u003eO-ring seal prevents leaks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e👉 Built for long-term reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eEasy Maintenance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e3 oz reservoir capacity\u003c\/li\u003e\n\u003cli\u003eKnurled base allows easy removal for draining\u003c\/li\u003e\n\u003cli\u003eMinimal maintenance required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e👉 Quick and simple servicing\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eDirect bolt-on installation\u003cbr\u003eIncludes vehicle-specific hoses and mounting bracket\u003cbr\u003eNo cutting or modifications required\u003cbr\u003eTypical install time: ~30–60 minutes\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat’s Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOil separator canister (clear anodized)\u003c\/li\u003e\n\u003cli\u003eMounting bracket\u003c\/li\u003e\n\u003cli\u003ePre-formed hoses\u003c\/li\u003e\n\u003cli\u003eHardware and fittings\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: \u003cstrong\u003eBillet Aluminum\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFinish: \u003cstrong\u003eClear Anodized (Satin)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCapacity: \u003cstrong\u003e3 oz\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSystem Type: \u003cstrong\u003eDriver Side (Clean Side)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFiltration: \u003cstrong\u003eMulti-Stage Internal Filter\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003ePopular Vehicle Applications\u003c\/h2\u003e\n\u003ch3\u003e👉 2019–2023 Ford Ranger 2.3L EcoBoost\u003c\/h3\u003e\n\u003cp\u003ePerfect for Ranger owners looking to \u003cstrong\u003eadd extra engine protection\u003c\/strong\u003e and reduce oil vapor contamination—especially for turbocharged, tuned, or daily-driven trucks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e👉 Pair with passenger side separator for full system protection\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy Buy from Iron Ridge Offroad\u003c\/h2\u003e\n\u003cp\u003e✔ Fast Shipping\u003cbr\u003e✔ Fast Processing\u003cbr\u003e✔ Off-Road Experts You Can Trust\u003cbr\u003e✔ Premium Brands \u0026amp; Proven Products\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eProtect your engine with the \u003cstrong\u003eJ\u0026amp;L 3.0 Driver Side Oil Separator (3037D-C) \u003c\/strong\u003ea simple, effective upgrade for long-term reliability and performance.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":47893737341166,"sku":"3037D-C","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/jl-driver-side-oil-separator-30-clear-anodized-2019-2023-ford-ranger-23l-engine-components-7081981.jpg?v=1776460627"},{"product_id":"j-l-2019-2024-ford-ranger-2-3l-driver-side-oil-separator-3-0-blk-anodized","title":"J\u0026L Driver Side Oil Separator 3.0 Black Anodized - 2019-2023 Ford Ranger 2.3L","description":"\u003ch1\u003eJ\u0026amp;L 3.0 Oil Separator (Driver Side) – Ford Ranger 2.3L\u003c\/h1\u003e\n\u003ch3\u003e2019–2023 Ford Ranger 2.3L EcoBoost | Driver Side Catch Can | SKU: 3037D-B\u003c\/h3\u003e\n\u003cp\u003eProtect your Ranger’s engine and maintain peak performance with the \u003cstrong\u003eJLT 3.0 Oil Separator (3037D-B)\u003c\/strong\u003e. Designed specifically for the \u003cstrong\u003e2019–2023 Ford Ranger 2.3L EcoBoost\u003c\/strong\u003e, this system captures harmful oil vapors before they can enter your intake system.\u003c\/p\u003e\n\u003cp\u003eDuring normal operation, oil vapors from the PCV system can accumulate in the intake tract, leading to carbon buildup and reduced performance. The \u003cstrong\u003eJLT Oil Separator prevents this by capturing and storing contaminants\u003c\/strong\u003e, helping keep your intake system clean and your engine running efficiently. \u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003esolid billet aluminum with a multi-stage filtration system\u003c\/strong\u003e, this unit separates even fine oil vapors and stores them in a \u003cstrong\u003e3 oz capacity reservoir\u003c\/strong\u003e for easy draining and maintenance.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDirect fit for 2019–2023 Ford Ranger 2.3L EcoBoost\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSKU: 3037D-B\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDriver side oil separator (PCV system)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eCaptures oil vapors before entering intake\u003c\/li\u003e\n\u003cli\u003eReduces carbon buildup on intake valves\u003c\/li\u003e\n\u003cli\u003eSolid billet aluminum construction\u003c\/li\u003e\n\u003cli\u003eMulti-stage internal filtration system\u003c\/li\u003e\n\u003cli\u003e3 oz capacity reservoir\u003c\/li\u003e\n\u003cli\u003eBlack anodized finish for durability\u003c\/li\u003e\n\u003cli\u003eImproves long-term engine performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003e⚠️ Fitment Note (IMPORTANT)\u003c\/h2\u003e\n\u003cp\u003e❗ Fits \u003cstrong\u003e2019–2023 Ford Ranger 2.3L EcoBoost ONLY\u003c\/strong\u003e\u003cbr\u003e❗ \u003cstrong\u003eDriver side (PCV side) separator\u003c\/strong\u003e\u003cbr\u003e❗ \u003cstrong\u003eWill NOT fit 2.7L or Ranger Raptor models\u003c\/strong\u003e\u003cbr\u003e❗ Designed for EcoBoost turbocharged applications only\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eEngine Protection\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrevents oil vapor contamination in intake system\u003c\/li\u003e\n\u003cli\u003eReduces carbon buildup on valves and intake runners\u003c\/li\u003e\n\u003cli\u003eHelps maintain long-term engine health\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e👉 Keep your engine clean and efficient\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eImproved Performance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaintains proper air\/fuel mixture\u003c\/li\u003e\n\u003cli\u003eHelps preserve horsepower and throttle response\u003c\/li\u003e\n\u003cli\u003eReduces oil dilution in combustion process\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e👉 Protect your performance investment\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eHigh-Quality Construction\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBillet aluminum canister for durability\u003c\/li\u003e\n\u003cli\u003eInternal filtration system captures fine vapors\u003c\/li\u003e\n\u003cli\u003eBlack anodized finish resists corrosion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e👉 Built for long-term reliability\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eEasy Maintenance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e3 oz capacity catch can reservoir\u003c\/li\u003e\n\u003cli\u003eSimple drain design for quick servicing\u003c\/li\u003e\n\u003cli\u003eMinimal maintenance required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e👉 Quick and easy upkeep\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eDirect bolt-on installation\u003cbr\u003eIncludes vehicle-specific hoses and mounting bracket\u003cbr\u003eNo cutting or modifications required\u003cbr\u003eTypical install time: ~30–60 minutes \u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhat’s Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOil separator canister\u003c\/li\u003e\n\u003cli\u003eMounting bracket\u003c\/li\u003e\n\u003cli\u003ePre-formed PCV hoses\u003c\/li\u003e\n\u003cli\u003eHardware and fittings\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: \u003cstrong\u003eBillet Aluminum\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFinish: \u003cstrong\u003eBlack Anodized\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCapacity: \u003cstrong\u003e3 oz\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSystem Type: \u003cstrong\u003ePCV Side Separator\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eFiltration: \u003cstrong\u003eMulti-Stage Internal Filter\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch2\u003ePopular Vehicle Applications\u003c\/h2\u003e\n\u003ch3\u003e👉 2019–2023 Ford Ranger 2.3L EcoBoost\u003c\/h3\u003e\n\u003cp\u003ePerfect for Ranger owners looking to \u003cstrong\u003eprevent carbon buildup, protect their engine, and maintain performance, \u003c\/strong\u003eespecially for turbocharged and daily-driven vehicles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e👉 One of the best preventative upgrades for the 2.3L EcoBoost\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003eWhy Buy from Iron Ridge Offroad\u003c\/h2\u003e\n\u003cp\u003e✔ Fast Shipping\u003cbr\u003e✔ Fast Processing\u003cbr\u003e✔ Off-Road Experts You Can Trust\u003cbr\u003e✔ Premium Brands \u0026amp; Proven Products\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eProtect your engine with the \u003cstrong\u003eJLT 3.0 Oil Separator (3037D-B) \u003c\/strong\u003ea simple, effective upgrade for long-term performance and reliability.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":47893741863150,"sku":"3037D-B","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/jl-driver-side-oil-separator-30-black-anodized-2019-2023-ford-ranger-23l-engine-components-1138699.jpg?v=1776460696"},{"product_id":"j-l-23-25-ford-ecoboost-2-0-oil-separator-pcv-side-black-anodized","title":"J\u0026L 23-25 Ford Bronco 2.0 Oil Separator | Ford Bronco (21-26) (3056D-B)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2021–2026 Ford Bronco 2.0L Turbo\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3056D-B\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L 23-25 Ford Bronco 2.0 Oil Separator is a high-quality, billet aluminum component designed to improve your vehicle’s crankcase ventilation system. Crafted for Ford Bronco owners seeking a reliable solution to prevent oil vapors from contaminating the intake system, this oil separator helps maintain optimal engine performance and cleanliness. Its durable construction and efficient filtration system make it an excellent upgrade for turbocharged and supercharged engines, where crankcase pressures are higher and oil vapor management is critical.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eConstructed from solid billet aluminum for strength and durability\u003c\/li\u003e\n\u003cli\u003eKnurled tank base for easy removal and drainage of accumulated oil\u003c\/li\u003e\n\u003cli\u003eO-ring seal to prevent leaks and ensure a secure fit\u003c\/li\u003e\n\u003cli\u003eFine mesh stainless steel screen traps oil vapors effectively\u003c\/li\u003e\n\u003cli\u003eAluminum honeycomb filter enlarges and captures oil particles before they reach the intake\u003c\/li\u003e\n\u003cli\u003eTank capacity of 3 oz, requiring drainage every 2000–3000 miles\u003c\/li\u003e\n\u003cli\u003eDesigned to support clean intake airflow and reduce oil buildup in the intake system\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\n\u003cp\u003eThis oil separator features a precision-machined billet aluminum body, ensuring a robust and long-lasting component. The knurled base allows for straightforward removal and cleaning, while the stainless steel mesh and aluminum honeycomb filter work together to efficiently trap and grow oil vapors, preventing them from passing into the intake manifold. The O-ring seal guarantees a leak-free operation, making it a dependable upgrade for your vehicle’s crankcase ventilation system.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\n\u003cp\u003eDesigned specifically for the Ford Bronco models from 2021 to 2026 with a 2.0L engine, this oil separator installs in the crankcase ventilation line. Its bolt-on design ensures a straightforward installation process, providing a maintenance-friendly solution to oil vapor management without requiring additional modifications.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\n\u003cp\u003eThe package includes the billet aluminum oil separator unit, O-ring seal, and necessary hardware for installation.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48078318698734,"sku":"3056D-B","price":169.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/481e5031773e0eb20070540ab3fe0fcbL.jpg?v=1780034740"},{"product_id":"j-l-23-25-ford-ecoboost-2-0-oil-separator-pcv-side-clear-anodized","title":"J\u0026L 23-25 Ford Bronco Oil Separator | Ford Bronco (3056D-C)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2023–2025 Ford Bronco\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3056D-C\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L 23-25 Ford Bronco Oil Separator is a high-quality, billet aluminum component designed to improve your vehicle’s crankcase ventilation system. Engineered specifically for Ford Broncos from 2023 to 2025, this oil separator helps prevent oil vapors from entering the intake track, which can dilute fuel and reduce octane levels. Ideal for enthusiasts seeking a durable, reliable solution, this separator supports optimal engine performance and cleaner intake components. Its robust construction ensures long-lasting performance under demanding driving conditions.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstructed from solid billet aluminum for strength and durability\u003c\/li\u003e\n  \u003cli\u003eKnurled tank base allows easy removal for draining accumulated oil\u003c\/li\u003e\n  \u003cli\u003eO-ring seal prevents leaks and ensures a secure fit\u003c\/li\u003e\n  \u003cli\u003eIncorporates a fine mesh stainless steel screen to trap oil vapors\u003c\/li\u003e\n  \u003cli\u003eFeatures a 1\/2\" thick aluminum honeycomb filter to grow and separate oil particles\u003c\/li\u003e\n  \u003cli\u003eTank capacity of 3 oz, reducing the need for frequent maintenance\u003c\/li\u003e\n  \u003cli\u003eDesigned to support forced induction vehicles with increased crankcase pressures\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\n\u003cp\u003eThis oil separator is milled from solid billet aluminum, providing a sturdy and corrosion-resistant housing. Its design includes a knurled base for easy removal and a sealed O-ring to prevent leaks. The filtration system combines a fine mesh stainless steel screen with a thick aluminum honeycomb filter, ensuring efficient separation of oil vapors from the crankcase gases.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\n\u003cp\u003eDesigned as a direct replacement for your vehicle’s existing crankcase venting system, this separator installs easily with minimal tools. Proper maintenance involves draining the collected oil every 2000-3000 miles to keep the system functioning optimally.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\n\u003cp\u003eThis package includes the billet aluminum oil separator unit designed specifically for 2023–2025 Ford Bronco models, with all necessary seals and fittings for a secure installation.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48078318829806,"sku":"3056D-C","price":169.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/83f32eced4541f9e172fb5d92c526115L.jpg?v=1780034740"},{"product_id":"j-l-2025-ford-bronco-sport-23-25-ford-escape-oil-separator-3-0-pcv-side-black-anodized","title":"J\u0026L 2025 Ford Bronco Sport \/ 23-25 Ford Escape Oil Separator | Ford Bronco (3057D-B)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2023–2025 Ford Bronco Sport and Ford Escape\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3057D-B\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L Oil Separator is a high-quality, billet aluminum component designed to improve the ventilation system of your Ford Bronco Sport or Ford Escape. Engineered for enthusiasts and daily drivers alike, this oil separator helps prevent oil vapors from contaminating your intake system, ensuring cleaner airflow and better engine health. Its durable construction and innovative design make it a reliable upgrade that supports optimal engine operation and longevity.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eConstructed from solid billet aluminum for strength and durability\u003c\/li\u003e\n\u003cli\u003eKnurled tank base allows easy removal for draining accumulated oil\u003c\/li\u003e\n\u003cli\u003eO-ring seal ensures a leak-free connection\u003c\/li\u003e\n\u003cli\u003eFiltering system includes a fine mesh stainless steel screen to trap oil vapors\u003c\/li\u003e\n\u003cli\u003eIncorporates a 1\/2\" thick aluminum honeycomb filter to grow and separate oil particles\u003c\/li\u003e\n\u003cli\u003eTank capacity of 3 oz, reducing the need for frequent maintenance\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for turbocharged and supercharged engines to manage increased crankcase pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\n\u003cp\u003eThis oil separator features a precision-machined billet aluminum body, providing a robust and corrosion-resistant housing. The knurled base facilitates easy removal for maintenance, while the integrated O-ring seal guarantees a secure, leak-proof fit. The filtration system combines a stainless steel mesh screen with a honeycomb aluminum filter to efficiently trap and grow oil vapors, preventing them from passing into the intake system.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\n\u003cp\u003eDesigned as a direct bolt-on upgrade, this oil separator installs seamlessly onto your vehicle's crankcase vent system. Proper installation ensures optimal performance and longevity, making it suitable for DIY enthusiasts and professional mechanics alike.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\n\u003cp\u003eEach package includes the billet aluminum oil separator unit and all necessary hardware for installation.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48078318895342,"sku":"3057D-B","price":169.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/0bfce2d4fc1075900f21465ed93e869dL.jpg?v=1780034741"},{"product_id":"j-l-2025-ford-bronco-sport-23-25-ford-escape-oil-separator-3-0-pcv-side-clear-anodized","title":"J\u0026L Oil Separator | Ford Bronco (21-26) \/ Escape (23-25) (3057D-C)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2021–2026 Ford Bronco and 2023–2025 Ford Escape\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3057D-C\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L Oil Separator is a high-quality, billet aluminum component designed to help maintain engine cleanliness and performance in your Ford Bronco or Escape. Engineered for enthusiasts and daily drivers alike, this oil separator effectively captures oil vapors from the crankcase venting system, preventing them from entering the intake manifold. By doing so, it helps reduce carbon buildup, maintain optimal octane levels, and support engine longevity. Its robust construction and thoughtful design make it a reliable upgrade for those seeking to improve their vehicle’s efficiency and reduce maintenance needs.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstructed from solid billet aluminum for durability and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eKnurled tank base allows easy removal for draining accumulated oil\u003c\/li\u003e\n  \u003cli\u003eO-ring seal ensures a leak-free connection\u003c\/li\u003e\n  \u003cli\u003eFiltering system includes a fine mesh stainless steel screen to trap oil vapors\u003c\/li\u003e\n  \u003cli\u003eAluminum honeycomb filter enlarges oil droplets for effective separation\u003c\/li\u003e\n  \u003cli\u003eTank capacity of 3 oz minimizes the need for frequent draining\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for turbocharged and supercharged engines to handle increased crankcase pressure\u003c\/li\u003e\n  \u003cli\u003eEasy installation compatible with factory venting systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\n\u003cp\u003eThis oil separator features a precision-milled billet aluminum body, ensuring a solid, lightweight, and corrosion-resistant construction. The knurled base provides a secure grip for removal and maintenance, while the stainless steel mesh filter and aluminum honeycomb media work together to efficiently separate oil vapors from the crankcase gases. The compact design fits seamlessly into your vehicle’s existing venting system, making it a practical upgrade for enhancing engine health.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\n\u003cp\u003eDesigned for straightforward installation, this oil separator replaces or supplements the factory PCV system in your Ford Bronco or Escape. It requires no special tools or modifications, making it suitable for DIY enthusiasts and professional installers alike. Regular maintenance involves draining the separator every 2000–3000 miles to ensure optimal performance and prevent oil buildup.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\n\u003cp\u003eThe package includes the billet aluminum oil separator unit, O-ring seals, and necessary hardware for installation. No additional components are required for proper setup.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48078318993646,"sku":"3057D-C","price":169.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/9b7ae9cb80d604c0ee2cd2e1c20e9410L.jpg?v=1780034743"},{"product_id":"j-l-24-25-ford-ranger-raptor-3-0l-pcv-side-oil-separator-black-anodized","title":"J\u0026L 24-25 Ford Ranger Raptor 3.0L PCV Side Oil Separator | Black Anodized (3058P-B)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2024–2025 Ford Ranger Raptor 3.0L\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3058P-B\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L 24-25 Ford Ranger Raptor 3.0L PCV Side Oil Separator is a high-quality, billet aluminum component designed to improve your vehicle’s crankcase ventilation system. Crafted for enthusiasts seeking durability and efficiency, this oil separator helps prevent oil vapors from contaminating your intake system, ensuring cleaner airflow and optimal engine performance. Its robust construction and thoughtful design make it an excellent upgrade for turbocharged and supercharged engines, where crankcase pressure management is critical.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eManufactured from solid billet aluminum for strength and longevity\u003c\/li\u003e\n\u003cli\u003eKnurled tank base for easy removal and drainage\u003c\/li\u003e\n\u003cli\u003eO-ring seal to prevent leaks and ensure a secure fit\u003c\/li\u003e\n\u003cli\u003eFiltering system includes a fine mesh stainless steel screen to trap oil vapors\u003c\/li\u003e\n\u003cli\u003eAluminum honeycomb filter to grow and separate oil particles effectively\u003c\/li\u003e\n\u003cli\u003eTank capacity of 3 oz, requiring minimal maintenance\u003c\/li\u003e\n\u003cli\u003eDesigned to support consistent engine operation and reduce oil contamination in intake\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\n\u003cp\u003eThis oil separator is milled from solid billet aluminum, providing a durable and corrosion-resistant structure. Its precise machining and knurled base facilitate easy draining of accumulated oil, while the O-ring seal ensures a leak-free operation. The filtering media combines a stainless steel mesh and aluminum honeycomb to efficiently trap and grow oil vapors, preventing them from passing into the intake system and maintaining cleaner airflow.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\n\u003cp\u003eDesigned specifically for the 2024–2025 Ford Ranger Raptor with a 3.0L engine, this oil separator installs seamlessly into the crankcase ventilation system. Proper installation helps optimize crankcase pressure management and reduces oil buildup in intake components, supporting long-term engine health and performance.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\n\u003cp\u003eThis package includes the billet aluminum oil separator with all necessary fittings and hardware for a straightforward installation.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48078319124718,"sku":"3058P-B","price":169.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/ae2c01c2dc5c95baa9a98742043b36a7L.jpg?v=1780034744"},{"product_id":"j-l-24-25-ford-ranger-raptor-3-0l-pcv-side-oil-separator-clear-anodized","title":"J\u0026L 24-25 Ford Ranger Raptor 3.0L PCV Side Oil Separator | Clear Anodized (3058P-C)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2024–2025 Ford Ranger Raptor 3.0L\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3058P-C\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L 24-25 Ford Ranger Raptor 3.0L PCV Side Oil Separator is a high-quality, billet aluminum component designed to improve your engine's crankcase ventilation system. Crafted for enthusiasts seeking durability and efficiency, this oil separator helps prevent oil vapors from entering your intake, reducing carbon buildup and maintaining optimal engine performance. Its robust construction and thoughtful design make it an excellent upgrade for turbocharged and supercharged engines, where crankcase pressures are higher.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eManufactured from solid billet aluminum for strength and longevity\u003c\/li\u003e\n\u003cli\u003eKnurled tank base for easy removal and draining of accumulated oil\u003c\/li\u003e\n\u003cli\u003eO-ring seal to ensure a leak-proof connection\u003c\/li\u003e\n\u003cli\u003eFiltering system includes a fine mesh stainless steel screen to trap oil vapors\u003c\/li\u003e\n\u003cli\u003eAluminum honeycomb filter enlarges oil particles for effective separation\u003c\/li\u003e\n\u003cli\u003eTank capacity of 3 oz, requiring minimal maintenance\u003c\/li\u003e\n\u003cli\u003eDesigned to support consistent engine operation and reduce intake contamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\n\u003cp\u003eThis oil separator features a precision-milled billet aluminum body, ensuring durability under demanding conditions. The knurled base provides a secure grip for easy removal, while the integrated O-ring guarantees a tight seal. The filtering system combines a stainless steel mesh and aluminum honeycomb to efficiently trap oil vapors, preventing them from passing into the intake system and diluting fuel quality.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\n\u003cp\u003eDesigned as a direct bolt-on upgrade, this oil separator installs seamlessly onto the crankcase vent line of your Ford Ranger Raptor 3.0L. Proper installation ensures optimal performance and maintenance ease, with the tank needing to be drained every 2000-3000 miles for best results.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\n\u003cp\u003eIncludes the billet aluminum oil separator unit with all necessary fittings and seals for a straightforward installation.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48078319157486,"sku":"3058P-C","price":169.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/80b2fe7fcec6ac84461d62fabf83fb6eL.jpg?v=1780034744"},{"product_id":"j-l-2025-ford-bronco-2-3l-23-25-ford-ranger-2-3l-separator-3-0-pcv-side-clear-anodized","title":"J\u0026L Oil Separator | Ford Ranger \/ Bronco (19-26) (3059P-C)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2019–2026 Ford Ranger and Bronco\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3059P-C\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L Oil Separator is a high-quality, billet aluminum component designed to improve the efficiency of your vehicle’s crankcase ventilation system. Specifically engineered for Ford Ranger and Bronco models from 2019 to 2026, this oil separator helps prevent oil vapors from entering your intake system, reducing carbon buildup and maintaining optimal engine performance. Its robust construction and innovative filtering system make it an ideal upgrade for enthusiasts seeking durability and reliability in their vehicle’s maintenance components.\u003c\/p\u003e\n\n\u003cp\u003eThis oil separator is perfect for owners looking to protect their engine from oil contamination, especially in forced induction applications where crankcase pressures are higher. By trapping oil vapors before they reach the intake, it supports cleaner combustion, better gas octane levels, and overall engine longevity. Its sleek billet aluminum design not only ensures durability but also adds a professional, performance-oriented look under the hood.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L Oil Separator combines advanced materials and thoughtful design to deliver a reliable solution for crankcase vapor management. Key features include:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstructed from solid billet aluminum for maximum strength and durability\u003c\/li\u003e\n  \u003cli\u003eKnurled tank base for easy removal and oil drainage\u003c\/li\u003e\n  \u003cli\u003eO-ring seal to prevent leaks and ensure a secure fit\u003c\/li\u003e\n  \u003cli\u003eFiltering system featuring a fine mesh stainless steel screen to trap oil vapors\u003c\/li\u003e\n  \u003cli\u003eAluminum honeycomb filter that grows larger oil droplets for effective separation\u003c\/li\u003e\n  \u003cli\u003eTank capacity of 3 oz, reducing the need for frequent draining\u003c\/li\u003e\n  \u003cli\u003eDesigned for easy maintenance with a simple drain every 2000-3000 miles\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48078319223022,"sku":"3059P-C","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/e106e44967213f7d843ec14fbe2ba753L.jpg?v=1780034745"},{"product_id":"j-l-2021-2025-ford-bronco-2-7l-3-0-oil-separator-passenger-side-clear-anodized","title":"J\u0026L Oil Separator | Ford Bronco (21-26) (3073P-C)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2021–2026 Ford Bronco\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3073P-C\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L Oil Separator is a high-quality, billet aluminum component designed to help maintain your engine’s cleanliness and performance. Specifically engineered for the Ford Bronco models from 2021 to 2026, this oil separator effectively captures oil vapors from the crankcase venting system, preventing them from entering the intake manifold. This not only helps keep your intake system cleaner but also supports optimal engine performance and efficiency. Made from durable solid billet aluminum, it offers a robust construction that withstands the rigors of daily driving and high-performance use.\u003c\/p\u003e\n\n\u003cp\u003eIdeal for enthusiasts and daily drivers alike, this oil separator is a practical upgrade that supports engine longevity by reducing oil vapor buildup in critical intake components. Its sleek design and high-quality materials ensure reliable operation and easy maintenance, making it a valuable addition to your vehicle’s maintenance routine.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L Oil Separator combines innovative design with durable materials to provide a reliable solution for crankcase vapor management. Key features include:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eConstructed from solid billet aluminum for strength and longevity\u003c\/li\u003e\n\u003cli\u003eKnurled tank base for easy removal and draining of accumulated oil\u003c\/li\u003e\n\u003cli\u003eO-ring seal to prevent leaks and ensure a secure fit\u003c\/li\u003e\n\u003cli\u003eFiltering system with a fine mesh stainless steel screen to trap oil vapors\u003c\/li\u003e\n\u003cli\u003eAluminum honeycomb filter that grows larger oil droplets for effective separation\u003c\/li\u003e\n\u003cli\u003eTank capacity of 3 oz, reducing the need for frequent draining\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for turbocharged and supercharged engines to handle increased crankcase pressure\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48078319354094,"sku":"3073P-C","price":169.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/2e635a41a2730228c68081a3c43c8291.jpg?v=1780034746"},{"product_id":"j-l-2021-5-2024-ford-bronco-2-3l-ecoboost-oil-separator-3-0-passenger-side-clear-anodized","title":"J\u0026L 3.0 Passenger Side Oil Separator | Ford Bronco (21-26) (3075P-C)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2021–2026 Ford Bronco\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3075P-C\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L 3.0 Passenger Side Oil Separator is a high-quality, billet aluminum component designed to improve your Ford Bronco's crankcase ventilation system. Engineered for enthusiasts seeking to maintain optimal engine performance and cleanliness, this oil separator helps prevent oil vapors from entering your intake system, reducing carbon buildup and potential performance issues. Its durable construction and efficient filtration system make it an ideal upgrade for turbocharged or supercharged engines, where crankcase pressures are higher and oil vapor management is critical.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstructed from solid billet aluminum for maximum durability and heat resistance\u003c\/li\u003e\n  \u003cli\u003eKnurled tank base allows easy removal for draining accumulated oil\u003c\/li\u003e\n  \u003cli\u003eO-ring seal ensures a leak-proof connection\u003c\/li\u003e\n  \u003cli\u003eFine mesh stainless steel screen captures oil vapors effectively\u003c\/li\u003e\n  \u003cli\u003e1\/2\" thick aluminum honeycomb filter enlarges and traps oil particles before they reach the intake\u003c\/li\u003e\n  \u003cli\u003eTank capacity of 3 oz minimizes maintenance frequency\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for passenger side installation on Ford Bronco models from 2021 to 2026\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\n\u003cp\u003eThis oil separator features a precision-machined billet aluminum body, ensuring a robust and lightweight construction. The knurled base provides a secure grip for easy removal and cleaning, while the integrated O-ring guarantees a tight seal to prevent leaks. The filtration system combines a fine mesh stainless steel screen with a thick aluminum honeycomb filter, effectively trapping oil vapors and preventing them from entering your intake system, thereby supporting cleaner engine operation and improved performance.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\n\u003cp\u003eDesigned for straightforward installation on the passenger side of your Ford Bronco (2021–2026), this oil separator replaces or upgrades existing PCV components. Proper fitment ensures optimal performance and ease of maintenance, with minimal tools required for installation or draining.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\n\u003cp\u003eThe package includes the billet aluminum oil separator unit, O-ring seal, and necessary hardware for installation.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48078319452398,"sku":"3075P-C","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/abdadef9ba8110e65232397684f46cb9.jpg?v=1780034747"},{"product_id":"j-l-21-21-5-ford-bronco-2-3l-ecoboost-passenger-side-3-0-oil-separator-black-anodized","title":"J\u0026L 21-21.5 Ford Bronco 2.3L Ecoboost Passenger Side 3.0 Oil Separator | Ford Bronco (21-26) (3078D-B)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2021–2026 Ford Bronco 2.3L EcoBoost\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3078D-B\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L 21-21.5 Ford Bronco 2.3L EcoBoost Passenger Side 3.0 Oil Separator is a high-quality, performance-oriented component designed to improve your vehicle’s crankcase ventilation system. Crafted from solid billet aluminum, this oil separator offers durability and a precise fit for Ford Bronco models from 2021 to 2026. It helps prevent oil vapors from entering your intake system, reducing carbon buildup and maintaining optimal engine performance. This product is ideal for enthusiasts seeking a reliable upgrade that supports engine cleanliness and longevity.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstructed from solid billet aluminum for strength and durability\u003c\/li\u003e\n  \u003cli\u003eKnurled tank base for easy removal and draining of accumulated oil\u003c\/li\u003e\n  \u003cli\u003eO-ring seal to prevent leaks and ensure a secure fit\u003c\/li\u003e\n  \u003cli\u003eFiltering system includes a fine mesh stainless steel screen to trap oil vapors\u003c\/li\u003e\n  \u003cli\u003eAluminum honeycomb filter enlarges oil droplets for effective separation\u003c\/li\u003e\n  \u003cli\u003eTank capacity of 3 oz, requiring minimal maintenance\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for the passenger side of the Ford Bronco 2.3L EcoBoost engine\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\n\u003cp\u003eThis oil separator features a robust billet aluminum construction, ensuring long-lasting performance under demanding conditions. The knurled base allows for straightforward removal to drain the collected oil, while the O-ring seal guarantees a leak-free operation. Its compact, solid design is engineered to fit seamlessly into the engine bay, supporting efficient crankcase venting and oil vapor management.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\n\u003cp\u003eDesigned as a direct bolt-on replacement, this oil separator installs easily on the passenger side of your Ford Bronco's engine bay. Proper installation ensures optimal function and maintenance, with minimal downtime. Regular draining every 2000-3000 miles helps maintain its effectiveness and keeps your engine running clean.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\n\u003cp\u003eThis package includes the oil separator unit designed specifically for the Ford Bronco 2.3L EcoBoost engine, with all necessary hardware for a straightforward installation.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48078319550702,"sku":"3078D-B","price":169.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/ded3411f030f8536fc738728d5615880.jpg?v=1780034747"},{"product_id":"j-l-21-21-5-ford-bronco-2-3l-ecoboost-passenger-side-3-0-oil-separator-clear-anodized","title":"J\u0026L 21-21.5 Ford Bronco 2.3L Ecoboost Passenger Side 3.0 Oil Separator | Ford Bronco (21-26) (3078D-C)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2021–2026 Ford Bronco 2.3L Ecoboost Passenger Side\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3078D-C\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L 21-21.5 Ford Bronco 2.3L Ecoboost Passenger Side 3.0 Oil Separator is a high-quality, billet aluminum component designed to improve your vehicle’s crankcase ventilation system. Engineered specifically for Ford Bronco models from 2021 to 2026, this oil separator helps prevent oil vapors from entering the intake track, which can dilute fuel, lower octane, and reduce engine efficiency. It’s an ideal upgrade for enthusiasts seeking to maintain optimal engine cleanliness and performance, especially in turbocharged applications where crankcase pressure is elevated.\u003c\/p\u003e\n\n\u003cp\u003eThis oil separator is crafted from solid billet aluminum for durability and precision. Its knurled tank base allows for easy removal and drainage of accumulated oil, while an O-ring seal ensures a leak-free operation. The filtering system features a fine mesh stainless steel screen that captures oil vapors, releasing only the heaviest droplets. These droplets then pass through a 1\/2\" thick aluminum honeycomb filter, where they grow larger and fall into the tank. With a capacity of 3 ounces, it effectively manages oil buildup, requiring drainage approximately every 2000-3000 miles to keep your system clean and functioning optimally.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstructed from solid billet aluminum for strength and longevity\u003c\/li\u003e\n  \u003cli\u003eKnurled tank base for easy removal and oil drainage\u003c\/li\u003e\n  \u003cli\u003eLeak-proof O-ring seal to prevent vapors and oil leaks\u003c\/li\u003e\n  \u003cli\u003eFine mesh stainless steel vapor filter for efficient oil vapor trapping\u003c\/li\u003e\n  \u003cli\u003eAluminum honeycomb filter enlarges oil droplets for effective separation\u003c\/li\u003e\n  \u003cli\u003e3 oz capacity minimizes the need for frequent draining\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for Ford Bronco 2.3L Ecoboost models (2021–2026)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48078319649006,"sku":"3078D-C","price":169.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/f9ea30697f108b6e087f6b479fce283d.jpg?v=1780034749"},{"product_id":"j-l-22-25-ford-bronco-raptor-3-0l-ecoboost-pcv-side-oil-separator-3-0-black-anodized","title":"J\u0026L 22-25 Ford Bronco Raptor 3.0L EcoBoost PCV Side Oil Separator | Ford Bronco (21-26) (3096P-B)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2021–2026 Ford Bronco Raptor 3.0L EcoBoost\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3096P-B\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L 22-25 Ford Bronco Raptor 3.0L EcoBoost PCV Side Oil Separator is a high-quality, performance-oriented component designed to improve your vehicle’s crankcase ventilation system. Crafted from solid billet aluminum, this oil separator helps prevent oil vapors from entering your intake system, reducing carbon buildup and maintaining optimal engine performance. It is ideal for enthusiasts seeking a durable, reliable solution to keep their turbocharged or supercharged engines running clean and efficiently.\u003c\/p\u003e\n\n\u003cp\u003eThis oil separator is engineered to trap fine oil vapors before they can reach your intake manifold, helping to preserve fuel octane and prevent oil dilution. Its robust construction and thoughtful design make it a practical upgrade for your Ford Bronco Raptor, supporting long-term engine health and consistent performance.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cp\u003eDesigned for durability and ease of maintenance, the J\u0026amp;L oil separator offers several key benefits:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eManufactured from solid billet aluminum for strength and longevity\u003c\/li\u003e\n\u003cli\u003eKnurled tank base for easy removal and oil drainage\u003c\/li\u003e\n\u003cli\u003eO-ring seal to prevent leaks and ensure a tight fit\u003c\/li\u003e\n\u003cli\u003eFiltering system includes a fine mesh stainless steel screen to trap oil vapors\u003c\/li\u003e\n\u003cli\u003eAluminum honeycomb filter enlarges and captures heavier oil particles\u003c\/li\u003e\n\u003cli\u003eTank capacity of 3 oz, reducing the need for frequent draining\u003c\/li\u003e\n\u003cli\u003eSupports turbocharged and supercharged engines by managing crankcase pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\n\u003cp\u003eThis oil separator features a precision-milled billet aluminum body, providing a sturdy and corrosion-resistant housing. The knurled base allows for straightforward removal to drain accumulated oil, while the O-ring seal ensures a leak-free operation. The filtering system combines a stainless steel mesh screen with an aluminum honeycomb filter to effectively trap and grow larger oil vapors, preventing them from passing into the intake system.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\n\u003cp\u003eDesigned specifically for the 2021–2026 Ford Bronco Raptor equipped with a 3.0L EcoBoost engine, this oil separator installs in the crankcase ventilation system with minimal effort. Proper installation helps optimize engine response and maintain clean intake components, supporting your vehicle’s performance and reliability.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\n\u003cp\u003eThe package includes the billet aluminum oil separator unit, necessary O-rings, and installation hardware to ensure a secure fit and optimal operation.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48078319681774,"sku":"3096P-B","price":169.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/7a8c973145b802a6553743114ebfdb79L.jpg?v=1780034749"},{"product_id":"j-l-22-25-ford-bronco-raptor-3-0l-ecoboost-pcv-side-oil-separator-3-0-clear-anodized","title":"J\u0026L 3.0L EcoBoost PCV Side Oil Separator | Ford Bronco (21-26) (3096P-C)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2021–2026 Ford Bronco 3.0L EcoBoost\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3096P-C\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L 3.0L EcoBoost PCV Side Oil Separator is a high-quality, performance-oriented component designed specifically for Ford Bronco owners seeking to improve engine cleanliness and efficiency. Crafted from solid billet aluminum, this oil separator offers durability and a precise fit, ensuring reliable operation under demanding conditions. Its primary purpose is to prevent oil vapors from entering the intake system, which can lead to carbon buildup, reduced performance, and lower octane levels. By installing this separator, you help maintain cleaner intake components, support optimal engine response, and reduce the need for maintenance related to oil vapor buildup.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstructed from solid billet aluminum for strength and longevity\u003c\/li\u003e\n  \u003cli\u003eKnurled tank base for easy removal and draining of accumulated oil\u003c\/li\u003e\n  \u003cli\u003eO-ring seal to prevent leaks and ensure a secure fit\u003c\/li\u003e\n  \u003cli\u003eFine mesh stainless steel screen traps oil vapors effectively\u003c\/li\u003e\n  \u003cli\u003e1\/2\" thick aluminum honeycomb filter enlarges trapped oil particles\u003c\/li\u003e\n  \u003cli\u003eTank capacity of 3 oz, reducing the frequency of draining\u003c\/li\u003e\n  \u003cli\u003eDesigned to support forced induction engines with increased crankcase pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\n\u003cp\u003eThis oil separator features a robust billet aluminum construction, providing excellent durability and heat resistance. The knurled base allows for easy removal during maintenance, while the integrated O-ring ensures a leak-proof seal. The filtration system combines a fine mesh stainless steel screen with a thick aluminum honeycomb filter, effectively capturing oil vapors and preventing them from entering the intake system. Its compact design fits seamlessly into the engine bay, making it a practical upgrade for performance enthusiasts.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\n\u003cp\u003eDesigned as a direct bolt-on upgrade, this oil separator installs easily onto the PCV system of the Ford Bronco with a 3.0L EcoBoost engine from 2021 to 2026. Proper installation helps optimize engine performance and longevity by reducing oil vapor contamination in the intake system. Regular draining every 2000-3000 miles ensures optimal operation and prevents overflow.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48078319780078,"sku":"3096P-C","price":169.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/38636d51fd72456a8b1ef0f3d9ac87e8L.jpg?v=1780034750"},{"product_id":"j-l-24-25-ford-ranger-2-7l-ecoboost-pcv-side-black-anodized","title":"J\u0026L 2.7L EcoBoost PCV Side Black Anodized | Ford Ranger (19-26) (3099P-B)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2019–2026 Ford Ranger with 2.7L EcoBoost Engine\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3099P-B\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L 2.7L EcoBoost PCV Side Black Anodized Oil Separator is a high-quality performance accessory designed to improve your Ford Ranger's engine health and efficiency. Crafted from solid billet aluminum and finished with a durable black anodized coating, this oil separator helps prevent oil vapors from contaminating your intake system, ensuring cleaner airflow and optimal engine operation. It is ideal for enthusiasts seeking to maintain peak performance and protect their turbocharged or supercharged engines from oil buildup and related issues.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstructed from solid billet aluminum for strength and durability\u003c\/li\u003e\n  \u003cli\u003eBlack anodized finish for corrosion resistance and aesthetic appeal\u003c\/li\u003e\n  \u003cli\u003eKnurled tank base allows easy removal for oil drainage\u003c\/li\u003e\n  \u003cli\u003eO-ring seal prevents leaks and maintains system integrity\u003c\/li\u003e\n  \u003cli\u003eFine mesh stainless steel screen traps oil vapors effectively\u003c\/li\u003e\n  \u003cli\u003eIncludes a 1\/2\" thick aluminum honeycomb filter to grow and trap oil particles\u003c\/li\u003e\n  \u003cli\u003eTank capacity of 3 oz, reducing the need for frequent maintenance\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for turbocharged and supercharged engines to support optimal crankcase venting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\n\u003cp\u003eThis oil separator features a precision-machined billet aluminum body, ensuring a robust and long-lasting component. The knurled base provides a secure grip for easy removal and cleaning, while the integrated O-ring seal guarantees a leak-free operation. The filtration system combines a fine mesh stainless steel screen with a thick aluminum honeycomb filter, effectively trapping oil vapors before they can enter your intake system, helping to maintain cleaner airflow and prevent oil dilution.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\n\u003cp\u003eDesigned for direct bolt-on installation on the side of your Ford Ranger's engine bay, this oil separator requires no additional modifications. Proper installation ensures effective venting of crankcase pressure and oil vapor separation, supporting engine longevity and performance.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\n\u003cp\u003eThis package includes the J\u0026amp;L 2.7L EcoBoost PCV Side Black Anodized Oil Separator and all necessary hardware for installation.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48078319911150,"sku":"3099P-B","price":169.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/9305fce661f719db10ebb3430f59c8b4L.jpg?v=1780034750"},{"product_id":"j-l-24-25-ford-ranger-2-7l-ecoboost-pcv-side-clear-anodized","title":"J\u0026L 24-25mm Ford Ranger 2.7L EcoBoost PCV Side Clear Anodized | Ford Ranger (19-26) (3099P-C)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits Ford Ranger 2019–2026 with 2.7L EcoBoost Engine\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3099P-C\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L 24-25mm Ford Ranger 2.7L EcoBoost PCV Side Clear Anodized Oil Separator is a high-quality, billet aluminum component designed to improve your vehicle's crankcase ventilation system. Crafted for Ford Ranger owners seeking a reliable solution to reduce oil vapors entering the intake, this oil separator helps maintain engine cleanliness and performance. Its durable construction and efficient filtration system make it an ideal upgrade for enthusiasts and daily drivers alike who want to support their engine’s longevity and efficiency.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstructed from solid billet aluminum for durability and precision machining\u003c\/li\u003e\n  \u003cli\u003eClear anodized finish for corrosion resistance and aesthetic appeal\u003c\/li\u003e\n  \u003cli\u003eKnurled tank base for easy removal and oil drainage\u003c\/li\u003e\n  \u003cli\u003eO-ring seal to prevent leaks and ensure a tight fit\u003c\/li\u003e\n  \u003cli\u003eFine mesh stainless steel screen filters oil vapors effectively\u003c\/li\u003e\n  \u003cli\u003eAluminum honeycomb filter enlarges and captures heavier oil particles\u003c\/li\u003e\n  \u003cli\u003eTank capacity of 3 oz, reducing the need for frequent draining\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for turbocharged and supercharged engines to manage increased crankcase pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\n\u003cp\u003eThis oil separator features a robust billet aluminum body, milled to precise specifications for a perfect fit. The knurled base allows for easy removal during maintenance, while the O-ring seal ensures a leak-free operation. The filtration system combines a fine stainless steel mesh with a thick aluminum honeycomb filter, providing efficient separation of oil vapors from the crankcase gases before they re-enter the intake system.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\n\u003cp\u003eDesigned to fit Ford Ranger models from 2019 to 2026 equipped with a 2.7L EcoBoost engine, this oil separator is a direct bolt-on upgrade. Proper installation requires basic mechanical skills and tools, and it can be integrated into your existing PCV system with minimal effort.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\n\u003cp\u003eThis package includes the billet aluminum oil separator with all necessary seals and fittings for a secure installation.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48078320042222,"sku":"3099P-C","price":169.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/b4cdae2056f5580a6289409c02324af7L.jpg?v=1780034752"},{"product_id":"j-l-2025-ford-bronco-2-3l-23-25-ford-ranger-2-3l-separator-3-0-pcv-side-black-anodized","title":"J\u0026L Oil Separator | Ford Ranger (19-26), Ford Bronco (21-26) (3059P-B)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2019–2026 Ford Ranger and 2021–2026 Ford Bronco\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3059P-B\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L Oil Separator is a high-quality, billet aluminum component designed to improve the efficiency of your vehicle’s crankcase ventilation system. Specifically engineered for Ford Ranger models from 2019 to 2026 and Ford Bronco models from 2021 to 2026, this oil separator helps prevent oil vapors from entering your intake system, which can lead to reduced octane levels and potential engine deposits. Ideal for enthusiasts and daily drivers alike, this durable upgrade supports cleaner intake airflow and helps maintain optimal engine performance over time.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstructed from solid billet aluminum for strength and longevity\u003c\/li\u003e\n  \u003cli\u003eKnurled tank base for easy removal and draining of accumulated oil\u003c\/li\u003e\n  \u003cli\u003eO-ring seal to ensure a leak-free operation\u003c\/li\u003e\n  \u003cli\u003eFine mesh stainless steel screen traps oil vapors effectively\u003c\/li\u003e\n  \u003cli\u003e1\/2\" thick aluminum honeycomb filter enlarges trapped oil particles before they fall into the tank\u003c\/li\u003e\n  \u003cli\u003eTank capacity of 3 oz, reducing the need for frequent maintenance\u003c\/li\u003e\n  \u003cli\u003eDesigned to support forced induction vehicles with increased crankcase pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\n\u003cp\u003eThis oil separator features a robust billet aluminum construction, ensuring durability under demanding conditions. Its knurled base allows for quick removal and drainage, while the stainless steel mesh and honeycomb filter work together to efficiently trap and grow oil vapors, preventing them from passing into the intake system. The sealed design guarantees no leaks, making it a reliable addition to your vehicle’s ventilation setup.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\n\u003cp\u003eDesigned as a direct bolt-on upgrade, this oil separator installs easily onto compatible Ford Ranger and Bronco models. Proper installation ensures optimal performance and maintenance, with a recommended drain interval of every 2000–3000 miles to prevent overflow and maintain efficiency.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\n\u003cp\u003eThe package includes the billet aluminum oil separator unit, all necessary seals, and mounting hardware for straightforward installation.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48078392131822,"sku":"3059P-B","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/cf009b5cc69fa46f7c96b2955e68cae2L.jpg?v=1780034900"},{"product_id":"j-l-2021-2025-ford-bronco-2-7l-3-0-oil-separator-passenger-side-black","title":"J\u0026L 2.7L\/3.0L Oil Separator | Ford Bronco (21-26) Passenger Side (3073P-B)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2021–2026 Ford Bronco Passenger Side\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3073P-B\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L 2.7L\/3.0L Oil Separator is a high-quality, billet aluminum component designed to improve the efficiency of your vehicle’s crankcase ventilation system. Specifically engineered for Ford Bronco models from 2021 to 2026 on the passenger side, this oil separator helps prevent oil vapors from contaminating your intake system, ensuring cleaner airflow and better engine performance. Crafted from solid billet aluminum, it offers durability and a premium feel, making it an excellent upgrade for enthusiasts seeking reliability and longevity.\u003c\/p\u003e\n\n\u003cp\u003eThis oil separator is ideal for those looking to maintain optimal engine health, reduce oil buildup in intake components, and support the longevity of their turbocharged or supercharged engines. Its robust construction and effective filtration system help keep your intake clean, supporting consistent performance and reducing maintenance needs over time.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstructed from solid billet aluminum for strength and durability\u003c\/li\u003e\n  \u003cli\u003eKnurled tank base for easy removal and drainage\u003c\/li\u003e\n  \u003cli\u003eO-ring seal to prevent leaks and ensure a tight fit\u003c\/li\u003e\n  \u003cli\u003eFine mesh stainless steel screen traps oil vapors effectively\u003c\/li\u003e\n  \u003cli\u003e1\/2\" thick aluminum honeycomb filter enlarges and captures oil particles\u003c\/li\u003e\n  \u003cli\u003eTank capacity of 3 oz, reducing the frequency of draining\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for the passenger side of Ford Bronco (21-26)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\n\u003cp\u003eThis oil separator features a precision-machined billet aluminum body, ensuring structural integrity and resistance to heat and corrosion. The knurled base allows for easy removal to drain accumulated oil, while the O-ring seal guarantees a leak-free operation. The filtration system combines a stainless steel mesh screen with a honeycomb aluminum filter, providing effective separation of oil vapors from airflow before they can reach your intake manifold.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\n\u003cp\u003eDesigned for direct bolt-on installation on the passenger side of the Ford Bronco (2021–2026), this oil separator requires no additional modifications. Properly installed, it seamlessly integrates into your existing crankcase ventilation system, helping to maintain optimal engine operation and cleanliness.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\n\u003cp\u003eIncludes the billet aluminum oil separator unit, O-ring seal, and necessary hardware for installation.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48078392721646,"sku":"3073P-B","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/22aba309492e7496322ba9f0acba6382.jpg?v=1780034901"},{"product_id":"j-l-2021-5-2024-ford-bronco-2-3l-ecoboost-oil-separator-3-0-passenger-side-black-anodized","title":"J\u0026L 2.3L EcoBoost Oil Separator | Ford Bronco (21-26) (3075P-B)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2021–2026 Ford Bronco 2.3L EcoBoost\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3075P-B\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L 2.3L EcoBoost Oil Separator is a high-quality performance accessory designed specifically for turbocharged Ford Bronco models from 2021 to 2026. Crafted from solid billet aluminum, this oil separator helps prevent oil vapors from entering your intake system, ensuring cleaner airflow, improved engine efficiency, and reduced carbon buildup. It is ideal for enthusiasts seeking to maintain optimal engine performance and longevity while supporting a cleaner, more efficient intake system.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstructed from durable, milled billet aluminum for long-lasting strength and reliability\u003c\/li\u003e\n  \u003cli\u003eFeatures a knurled tank base for easy removal and draining of accumulated oil\u003c\/li\u003e\n  \u003cli\u003eEquipped with an O-ring seal to prevent leaks and ensure a secure fit\u003c\/li\u003e\n  \u003cli\u003eIncorporates a fine mesh stainless steel screen to trap oil vapors effectively\u003c\/li\u003e\n  \u003cli\u003eIncludes a 1\/2\" thick aluminum honeycomb filter to grow and separate oil particles\u003c\/li\u003e\n  \u003cli\u003eTank capacity of 3 ounces, reducing the need for frequent maintenance\u003c\/li\u003e\n  \u003cli\u003eDesigned to support turbocharged engines by reducing crankcase pressure buildup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\n\u003cp\u003eThis oil separator is meticulously milled from solid billet aluminum, providing a robust and corrosion-resistant construction. Its knurled base allows for easy removal to drain the collected oil, while the O-ring seal ensures a leak-proof operation. The combination of stainless steel mesh and aluminum honeycomb filter ensures efficient separation of oil vapors, preventing them from passing into the intake system and helping maintain optimal engine performance.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\n\u003cp\u003eDesigned as a direct bolt-on upgrade, this oil separator installs seamlessly onto your Ford Bronco's existing crankcase vent system. Proper installation helps support engine health by reducing oil vapor contamination in the intake, making it a practical addition for turbocharged vehicle owners.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\n\u003cp\u003eEach package includes the billet aluminum oil separator with all necessary fittings and hardware for straightforward installation.\u003c\/p\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\n\u003cp\u003ePerformance enthusiasts and daily drivers alike who want to maintain engine cleanliness, improve airflow, and support the longevity of their turbocharged Ford Bronco’s engine system.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48078393508078,"sku":"3075P-B","price":169.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/e10d68b3a6a9eb0cbc3ecfbf1b6354cc.jpg?v=1780034901"},{"product_id":"j-l-11-17-ford-f-150-5-0l-11-14-ford-f-150-6-2l-driver-side-oil-separator-3-0-black-anodized","title":"J\u0026L 11-17 Ford F-150 5.0L \/ 11-14 Ford F-150 6.2L Driver Side Oil Separator | Ford F-150 (09-17) \/ Raptor (10-14) (3016D-B)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2009–2017 Ford F-150 and Raptor Models with 5.0L or 6.2L Engines\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3016D-B\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThis oil separator is a high-quality, billet aluminum component designed specifically for Ford F-150 trucks equipped with 5.0L and 6.2L engines from 2009 to 2017, including Raptor models from 2010 to 2014. Its primary purpose is to prevent oil vapors from entering the intake system, which can lead to reduced octane levels, carbon buildup, and potential engine performance issues. Crafted from solid billet aluminum, this separator offers durability and a premium feel, making it an excellent upgrade for enthusiasts seeking to maintain optimal engine cleanliness and efficiency.\u003c\/p\u003e\n\n\u003cp\u003eIdeal for those looking to improve their vehicle’s intake system and reduce oil contamination, this separator supports cleaner operation and helps maintain engine responsiveness over time. Its robust construction ensures long-lasting performance, even under demanding driving conditions.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstructed from solid billet aluminum for strength and durability\u003c\/li\u003e\n  \u003cli\u003eKnurled tank base for easy removal and draining of accumulated oil\u003c\/li\u003e\n  \u003cli\u003eO-ring seal to prevent leaks and ensure a secure fit\u003c\/li\u003e\n  \u003cli\u003eFiltering system includes a fine mesh stainless steel screen to trap oil vapors\u003c\/li\u003e\n  \u003cli\u003e1\/2\" thick aluminum honeycomb filter to grow and separate oil particles\u003c\/li\u003e\n  \u003cli\u003eTank capacity of 3 oz, reducing the need for frequent maintenance\u003c\/li\u003e\n  \u003cli\u003eDesigned to support forced induction vehicles by reducing crankcase pressure buildup\u003c\/li\u003e\n  \u003cli\u003eEasy installation with a direct bolt-on design for specific Ford F-150 models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\n\u003cp\u003eThe separator features a precision-machined billet aluminum body, ensuring a sturdy and corrosion-resistant construction. The knurled base allows for straightforward draining of collected oil, while the stainless steel mesh filter and aluminum honeycomb media work together to effectively trap and grow oil vapors, preventing them from entering the intake system. The use of high-quality materials guarantees longevity and reliable performance in demanding conditions.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\n\u003cp\u003eThis oil separator is designed for direct installation on 2009–2017 Ford F-150 trucks with 5.0L or 6.2L engines, including Raptor models from 2010 to 2014. It replaces the factory PCV system components, providing a more efficient and durable solution for managing crankcase vapors. Proper installation requires basic mechanical skills and tools, and detailed instructions are recommended for optimal fitment.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48082091606254,"sku":"3016D-B","price":169.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/a4ca7085a2fc330ff7d675a608e42910.jpg?v=1780133538"},{"product_id":"j-l-2011-2025-ford-f-150-2-7l-3-5l-5-0l-passenger-side-oil-separator-3-0-black-anodized","title":"J\u0026L 3.0 Black Anodized Passenger Side Oil Separator | Ford F-150 (13-26)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2013–2026 Ford F-150\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3016P-B\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L 3.0 Black Anodized Passenger Side Oil Separator is a high-quality, billet aluminum component designed to improve your Ford F-150's engine performance and longevity. Specifically engineered for trucks from 2013 to 2026, this oil separator helps prevent oil vapors from contaminating your intake system, ensuring cleaner airflow and more efficient engine operation. Its robust construction and thoughtful design make it an ideal upgrade for enthusiasts seeking durability, reliability, and enhanced engine health.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eConstructed from solid billet aluminum for strength and durability\u003c\/li\u003e\n\u003cli\u003eBlack anodized finish for corrosion resistance and a sleek appearance\u003c\/li\u003e\n\u003cli\u003eKnurled tank base for easy removal and oil drainage\u003c\/li\u003e\n\u003cli\u003eO-ring seal to prevent leaks and ensure a tight fit\u003c\/li\u003e\n\u003cli\u003eFiltering system includes a fine mesh stainless steel screen and a 1\/16\" aluminum honeycomb filter\u003c\/li\u003e\n\u003cli\u003eTank capacity of 3 oz to hold accumulated oil vapors\u003c\/li\u003e\n\u003cli\u003eDesigned to reduce oil buildup in intake components, supporting cleaner combustion and improved octane levels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\n\u003cp\u003eThis oil separator features a precision-milled billet aluminum body, offering exceptional strength and resistance to corrosion. Its knurled tank base allows for easy removal to drain collected oil, while the O-ring seal ensures a leak-proof operation. The filtration system combines a stainless steel mesh screen with a honeycomb aluminum filter to trap fine oil vapors effectively, preventing them from passing into your intake system and diluting your fuel mixture.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\n\u003cp\u003eDesigned for straightforward installation on the passenger side of your Ford F-150, this separator replaces or complements existing PCV components. Proper fitment and sealing are achieved through the included O-ring, ensuring reliable operation without leaks. Regular draining every 2000-3000 miles maintains optimal performance and prevents oil buildup.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\n\u003cp\u003eThis package includes the billet aluminum oil separator with all necessary seals and fittings for a secure installation.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48082092261614,"sku":"3016P-B","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/debbd845e015c8c6e2aaedd56c0e816d.jpg?v=1780133539"},{"product_id":"j-l-2011-2025-ford-f-150-2-7l-3-5l-5-0l-passenger-side-oil-separator-3-0-clear-anodized","title":"J\u0026L 3.0 Oil Separator | Ford F-150 (13-14, 24-26) (3016P-C)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2013–2014 and 2024–2026 Ford F-150\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3016P-C\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L 3.0 Oil Separator is a high-quality, billet aluminum component designed specifically for Ford F-150 trucks from 2013 to 2014 and 2024 to 2026. This performance accessory helps reduce oil vapors from entering the intake system, supporting cleaner operation and improved engine longevity. Crafted from solid billet aluminum, it offers durability and a premium look, making it an excellent upgrade for enthusiasts seeking to maintain optimal engine health and performance.\u003c\/p\u003e\n\n\u003cp\u003eDesigned for those who want to minimize oil buildup in their intake system, this oil separator effectively traps fine oil vapors before they can dilute your fuel or lower octane levels. Its robust construction ensures long-lasting performance, while the easy-to-remove tank base simplifies maintenance. Whether you’re a daily driver or a performance enthusiast, this separator helps keep your engine cleaner and running efficiently.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L Oil Separator combines innovative design with practical functionality to support your vehicle’s performance and reliability.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eConstructed from solid billet aluminum for strength and durability\u003c\/li\u003e\n\u003cli\u003eKnurled tank base allows easy removal for draining accumulated oil\u003c\/li\u003e\n\u003cli\u003eO-ring seal prevents leaks and ensures a tight fit\u003c\/li\u003e\n\u003cli\u003eFiltering system includes a fine mesh stainless steel screen to trap oil vapors\u003c\/li\u003e\n\u003cli\u003eHeavy oil vapors grow larger in a 1\/16\" aluminum honeycomb filter before falling into the tank\u003c\/li\u003e\n\u003cli\u003eTank capacity of 3 oz minimizes the need for frequent draining\u003c\/li\u003e\n\u003cli\u003eSupports forced induction vehicles by reducing crankcase pressure buildup\u003c\/li\u003e\n\u003cli\u003eDesigned for easy installation and maintenance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48082093048046,"sku":"3016P-C","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/973534f54da409e713f33f6aa848e899.jpg?v=1780133540"},{"product_id":"j-l-2021-2025-ford-f-150-3-5l-passenger-side-oil-separator-3-0-black-anodized","title":"J\u0026L 3.0L Passenger Side Oil Separator | Ford F-150 (21-26) \/ Raptor (21-26) (3028P-B)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2021–2026 Ford F-150 and Raptor\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3028P-B\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L 3.0L Passenger Side Oil Separator is a high-quality, billet aluminum component designed to help keep your engine's intake system clean and free of oil vapors. Specifically engineered for Ford F-150 and Raptor models from 2021 to 2026, this oil separator effectively traps oil vapors before they can enter your intake, reducing carbon buildup and maintaining optimal engine performance. Its durable construction and thoughtful design make it an ideal upgrade for enthusiasts seeking to improve their vehicle’s reliability and efficiency.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstructed from solid billet aluminum for strength and durability\u003c\/li\u003e\n  \u003cli\u003eKnurled tank base for easy removal and draining of accumulated oil\u003c\/li\u003e\n  \u003cli\u003eO-ring seal to prevent leaks and ensure a secure fit\u003c\/li\u003e\n  \u003cli\u003eFiltering system includes a fine mesh stainless steel screen to trap oil vapors\u003c\/li\u003e\n  \u003cli\u003eHeavy oil droplets grow larger on a 1\/2\" thick aluminum honeycomb filter and fall into the tank\u003c\/li\u003e\n  \u003cli\u003eTank capacity of 3 oz, requiring minimal maintenance\u003c\/li\u003e\n  \u003cli\u003eDesigned to support forced induction engines by reducing crankcase pressure buildup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\n\u003cp\u003eThis oil separator is milled from solid billet aluminum, providing a robust and corrosion-resistant housing. Its knurled base allows for easy removal to drain the collected oil, while the O-ring seal ensures a leak-free operation. The filtering system combines a fine stainless steel mesh with a thick aluminum honeycomb to effectively separate oil vapors from the crankcase gases, preventing them from entering the intake system.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\n\u003cp\u003eDesigned as a direct bolt-on upgrade, this oil separator installs on the passenger side of your vehicle’s engine bay. Proper installation ensures optimal performance and longevity, with minimal effort required for a secure fit.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\n\u003cp\u003eThe package includes the billet aluminum oil separator unit, along with all necessary hardware for installation.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48082095735022,"sku":"3028P-B","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/2a0632e5187da9dfc99af6d0420f8c17.jpg?v=1780133543"},{"product_id":"j-l-11-14-ford-f-150-ford-f-150-raptor-6-2l-passenger-side-oil-separator-3-0-black-anodized","title":"J\u0026L Oil Separator | Ford F-150 (09-14) \/ F-150 Raptor (10-14)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2009–2014 Ford F-150 and 2010–2014 F-150 Raptor\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3036P-B\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L Oil Separator is a high-quality, billet aluminum component designed to improve the efficiency of your vehicle’s crankcase ventilation system. Specifically engineered for Ford F-150 models from 2009 to 2014 and the F-150 Raptor from 2010 to 2014, this oil separator helps prevent oil vapors from entering your intake system, which can lead to reduced performance and lower octane levels. Its robust construction and innovative design make it an ideal upgrade for enthusiasts seeking durability and reliability in their engine bay.\u003c\/p\u003e\n\n\u003cp\u003eThis oil separator is perfect for those who want to maintain optimal engine cleanliness, reduce carbon buildup, and support consistent performance. Its sleek, solid billet aluminum build ensures long-lasting durability, while the easy-to-drain tank simplifies maintenance. By trapping oil vapors before they reach your intake, it helps keep your engine running smoothly and efficiently, especially in forced induction applications where crankcase pressures are higher.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L Oil Separator combines advanced materials and thoughtful design to deliver a reliable solution for your vehicle’s crankcase ventilation needs. Key features include:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eConstructed from solid billet aluminum for strength and durability\u003c\/li\u003e\n\u003cli\u003eKnurled tank base for easy removal and oil drainage\u003c\/li\u003e\n\u003cli\u003eO-ring seal to prevent leaks and ensure a tight fit\u003c\/li\u003e\n\u003cli\u003eFiltering system with a fine mesh stainless steel screen to trap oil vapors\u003c\/li\u003e\n\u003cli\u003eAluminum honeycomb filter to grow and separate oil particles\u003c\/li\u003e\n\u003cli\u003eTank capacity of 3 oz, requiring minimal maintenance\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for Ford F-150 and Raptor models within the specified years\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48082096423150,"sku":"3036P-B","price":169.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/5f5a69e1f8ee17038d67bcc6d12a71ec.jpg?v=1780133544"},{"product_id":"j-l-23-25-ford-f-150-raptor-r-oil-separator-3-0-passenger-side-black-anodized","title":"J\u0026L 23-25 Ford F-150 Raptor R Oil Separator | Ford F-150 Raptor (24-26) (3097P-B)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2024–2026 Ford F-150 Raptor\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3097P-B\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L 23-25 Ford F-150 Raptor R Oil Separator is a high-quality, billet aluminum component designed to improve your vehicle’s crankcase ventilation system. Engineered specifically for the Ford F-150 Raptor models from 2024 to 2026, this oil separator helps prevent oil vapors from entering the intake system, which can lead to reduced performance and lower octane levels. It’s an essential upgrade for enthusiasts seeking to maintain optimal engine cleanliness, efficiency, and longevity, especially in forced induction applications where crankcase pressures are higher.\u003c\/p\u003e\n\n\u003cp\u003eThis oil separator is crafted from solid billet aluminum, ensuring durability and a premium feel. Its knurled tank base allows for easy removal and draining of accumulated oil, while an O-ring seal guarantees a leak-free operation. The filtering system features a fine mesh stainless steel screen that captures oil vapors, allowing only the heavier droplets to fall into the bottom chamber. These vapors then pass through a 1\/2\" thick aluminum honeycomb filter, which enlarges and traps the oil particles before they can reach the intake, helping to keep your engine clean and running smoothly.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L Oil Separator combines robust materials and thoughtful design to support your vehicle’s performance and reliability:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eConstructed from solid billet aluminum for strength and longevity\u003c\/li\u003e\n\u003cli\u003eKnurled tank base for easy removal and oil drainage\u003c\/li\u003e\n\u003cli\u003eO-ring seal to prevent leaks and ensure a secure fit\u003c\/li\u003e\n\u003cli\u003eFine mesh stainless steel screen filters oil vapors effectively\u003c\/li\u003e\n\u003cli\u003eAluminum honeycomb filter enlarges and traps oil particles\u003c\/li\u003e\n\u003cli\u003eTank capacity of 3 oz, reducing the need for frequent maintenance\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for Ford F-150 Raptor models from 2024 to 2026\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48082097242350,"sku":"3097P-B","price":169.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/f907908ae6a868e8fe0c59ebf2fe6ee6L.jpg?v=1780133545"},{"product_id":"j-l-16-23-toyota-tacoma-3-5l-driver-side-oil-separator-3-0-clear-anodized","title":"J\u0026L 16-23 Toyota Tacoma 3.5L Driver Side Oil Separator | Toyota Tacoma (20-23) (3104D-C)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2020–2023 Toyota Tacoma 3.5L\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3104D-C\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\nThe J\u0026amp;L 16-23 Toyota Tacoma 3.5L Driver Side Oil Separator is a high-quality, billet aluminum component designed to improve your vehicle’s crankcase ventilation system. This oil separator helps prevent oil vapors from entering your intake track, which can lead to reduced performance, lower octane levels, and potential engine deposits. It is ideal for Tacoma owners seeking a durable, reliable solution to maintain optimal engine cleanliness and efficiency. Crafted from solid billet aluminum, this separator offers exceptional durability and a sleek, professional appearance. Its design ensures effective separation of oil vapors from crankcase gases, supporting your engine’s longevity and performance.\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstructed from solid billet aluminum for strength and durability\u003c\/li\u003e\n  \u003cli\u003eKnurled tank base for easy removal and draining of accumulated oil\u003c\/li\u003e\n  \u003cli\u003eO-ring seal to prevent leaks and ensure a secure fit\u003c\/li\u003e\n  \u003cli\u003eFine mesh stainless steel screen filters oil vapors effectively\u003c\/li\u003e\n  \u003cli\u003e1\/2\" thick aluminum honeycomb filter enlarges oil droplets for separation\u003c\/li\u003e\n  \u003cli\u003eTank capacity of 3 oz, reducing maintenance frequency\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for the driver side of the 16-23 Toyota Tacoma 3.5L engine\u003c\/li\u003e\n  \u003cli\u003eSupports engine cleanliness and helps maintain optimal performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\nThis oil separator features a robust billet aluminum construction, ensuring long-lasting performance under demanding conditions. The knurled base allows for easy removal to drain accumulated oil, while the O-ring seal guarantees a leak-free operation. The filtration system combines a fine stainless steel mesh with a thick aluminum honeycomb filter, effectively trapping oil vapors and preventing them from passing into the intake system.\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\nDesigned specifically for the driver side of the 2020–2023 Toyota Tacoma with a 3.5L engine, this oil separator is a direct bolt-on upgrade. Proper installation requires basic mechanical skills and tools, and it is recommended to follow the manufacturer’s instructions for optimal fitment and performance.\n\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\nThis package includes the billet aluminum oil separator unit, O-ring seal, and all necessary hardware for installation. No additional components are required for proper setup. Regular draining every 2000–3000 miles will ensure optimal operation and prevent oil buildup.","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48083930054894,"sku":"3104D-C","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/1a544faf595bc680d832e4b5e82f5698.jpg?v=1780205859"},{"product_id":"j-l-05-24-toyota-4runner-4-0l-driver-side-oil-separator-3-0-clear-anodized","title":"J\u0026L Driver Side Oil Separator | Toyota 4runner\/Lexus GX460 (05-24) 4.0L (3107D-C)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\u003ch2\u003eFits 2024 Toyota 4Runner 4.0L\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3107D-C\u003c\/p\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\nThe J\u0026amp;L 05-24 Toyota 4Runner 4.0L Driver Side Oil Separator is a high-quality aftermarket component designed to improve your vehicle’s crankcase ventilation system. Crafted from solid billet aluminum and finished with a clear anodized coating, this oil separator helps prevent oil vapors from entering your intake track, ensuring cleaner intake manifolds and improved engine performance. It is ideal for enthusiasts seeking to maintain optimal engine health and performance, especially in forced induction applications where crankcase pressures are elevated. This oil separator is engineered to support a cleaner, more efficient engine environment, reducing oil consumption and potential intake system deposits.\n\u003ch3\u003eKey Features\u003c\/h3\u003e\nDesigned from durable billet aluminum for strength and longevity\u003cbr\u003e\nClear anodized finish for corrosion resistance and aesthetic appeal\u003cbr\u003e\nEngineered to effectively separate oil vapors from crankcase gases\u003cbr\u003e\nSupports cleaner intake systems and improved engine response\u003cbr\u003e\nEasy to install with a direct bolt-on design for the driver side of the engine\u003cbr\u003e\nHelps maintain optimal crankcase pressure and reduce oil dilution\u003cbr\u003e\nCompatible with 2024 Toyota 4Runner 4.0L engines\u003cbr\u003e\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\nThis oil separator is milled from a solid billet block of aluminum, ensuring a precise fit and robust durability. The clear anodized coating not only enhances corrosion resistance but also provides a sleek, finished look that complements your engine bay. Its compact, streamlined design is tailored specifically for the driver side of the 4Runner’s engine compartment, making installation straightforward and secure.\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\nThe J\u0026amp;L oil separator is designed for a direct bolt-on installation on the driver side of the engine bay. It requires no additional modifications or specialized tools, making it suitable for DIY enthusiasts and professional installers alike. Proper installation helps ensure optimal performance and longevity of the component.\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\nThe package includes the oil separator unit, mounting hardware, and installation instructions, providing everything needed for a secure and effective upgrade.\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\nToyota 4Runner owners looking to maintain engine cleanliness and performance\u003cbr\u003e\nEnthusiasts seeking to reduce oil vapors and intake system deposits\u003cbr\u003e\nDrivers who want a durable, high-quality oil separator that supports forced induction applications","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48083930677486,"sku":"3107D-C","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/d7e524fc2426dafc80c0ebec684f5085.jpg?v=1780205860"},{"product_id":"j-l-22-25-toyota-tundra-23-25-sequoia-3-5l-turbo-oil-separator-3-0-driver-side-black-anodized","title":"J\u0026L 3.0 Driver Side Oil Separator | Toyota Tundra (22-26) (3115D-B)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2022–2026 Toyota Tundra\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3115D-B\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L 3.0 Driver Side Oil Separator is a high-quality, billet aluminum component designed to improve your Toyota Tundra's engine health and performance. Engineered specifically for the 2022 to 2026 models, this oil separator helps prevent oil vapors from contaminating your intake system, ensuring cleaner airflow and more efficient engine operation. Its robust construction and thoughtful design make it an ideal upgrade for enthusiasts seeking durability and reliability in their maintenance routine.\u003c\/p\u003e\n\n\u003cp\u003eThis oil separator is particularly beneficial for forced induction engines, such as turbocharged or supercharged setups, where crankcase pressure tends to be higher. By capturing oil vapors before they reach the intake, it reduces carbon buildup, maintains optimal octane levels, and supports consistent engine response. Its straightforward installation and maintenance make it a practical addition for those looking to enhance engine longevity and performance.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L oil separator combines premium materials with a functional design to deliver reliable performance and ease of use:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstructed from solid billet aluminum for durability and a premium finish\u003c\/li\u003e\n  \u003cli\u003eKnurled tank base for easy removal and oil draining\u003c\/li\u003e\n  \u003cli\u003eO-ring seal to prevent leaks and ensure a secure fit\u003c\/li\u003e\n  \u003cli\u003eFiltering system includes a fine mesh stainless steel screen to trap oil vapors\u003c\/li\u003e\n  \u003cli\u003eAluminum honeycomb filter enlarges oil particles, preventing them from passing into the intake\u003c\/li\u003e\n  \u003cli\u003eTank capacity of 3 oz, requiring draining every 2000–3000 miles\u003c\/li\u003e\n  \u003cli\u003eDesigned specifically for the driver side of the Toyota Tundra (22-26)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48083931365614,"sku":"3115D-B","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/b2be8559c00fba32540bc7eda53728fc.jpg?v=1780205861"},{"product_id":"j-l-2021-2024-ram-trx-6-2l-supercharged-passenger-side-oil-separator-3-0-clear-anodized","title":"J\u0026L Oil Separator Co. Oil Catch Can: Ram 6.2L TRX 2021 - 2024","description":"\u003ch3\u003eJ\u0026amp;L Oil Separator Co. OIL CATCH CAN (BILLET)\u003c\/h3\u003e\u003cp\u003e21-24 Ram 6.2L TRX\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3071P-B - Black Anodized\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3071P-C - Clear Anodized\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYeah, it's got a HEMI... but does it have an oil separator?  Anyone who owns a 6.2L Hemi Dodge or Jeep vehicle knows this is a critical upgrade to prevent oil blow-by from robbing you of performance and causing costly repairs.  Don't worry, J\u0026amp;L Oil Separator Co. has your back!  \n\nOur oil catch cans are custom designed to fit like a glove, look great, and keep your engine running at peak performance.  They come with everything you need right out of the box for an fast and effortless install.\n\nYou get a lifetime warranty too, because our oil separators are that good! \u003cstrong\u003e\n\nJ\u0026amp;L 3.0 Oil Separator\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3oz Capacity\u003c\/li\u003e\n\u003cli\u003eSolid billet construction.\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDuring the process of venting crankcase pressure back through your intake track, large amounts of oil, in the form of vapors can gather\/accumulate in your intake tube, intake manifold runners and even dilute your gas, lowering its octane level. This happens on all engines and is even worse with forced inducted vehicles (supercharged and turbocharged) as crankcase pressures are increased. To combat this, we have developed an oil separator of our own design. Milled from solid billet aluminum this is a rock-solid piece. It has a knurled tank base for easy removal to drain the spent oil and an O-ring seal to prevent any leaks.\u003c\/p\u003e\u003cp\u003eFiltering consists of a fine mesh stainless steel screen that traps fine oil vapors and releases them once heavy enough to fall. They then pass through a 1\/2\" thick 1\/16th\" aluminum honeycomb filter where they grow every larger and then fall into the bottom. By the time the oil gets through the filter it's too heavy to be passed on into the intake. The tank holds 3 oz of fluid, while that may not sound like a lot, you shouldn’t see that much oil in your PCV system. Drain it every 2000-3000 miles and you will never come close to filling it.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48084129612014,"sku":"3071P-C","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/432096fbf2794d574916af2512da9740.jpg?v=1780209945"},{"product_id":"j-l-19-25-ram-1500-3-6l-oil-separator-3-0-pcv-side-clear-anodized","title":"J\u0026L Clear Anodized Oil Separator 3.0 PCV Side: Ram 1500 2019-2026","description":"\u003ch3\u003eJ\u0026amp;L Oil Separator 3.0 PCV Side\u003c\/h3\u003e\u003cp\u003e2019–2026 Ram 1500 3.6L\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3126P-C\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe J\u0026amp;L Clear Anodized Oil Separator 3.0 PCV Side is engineered to improve the crankcase ventilation system on your Ram 1500, model years 2019 through 2026. This high-quality oil separator effectively captures oil vapors from the PCV system before they can enter the intake tract, preventing oil buildup in the intake manifold, runners, and intake tube. By reducing oil contamination, it helps maintain fuel octane levels and engine efficiency, especially important for forced induction engines where crankcase pressures are elevated.\u003c\/p\u003e\u003cp\u003eDesigned for durability and ease of maintenance, this oil separator is an essential upgrade for Ram 1500 owners looking to protect their engine’s performance and longevity while keeping the intake system clean.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe J\u0026amp;L Oil Separator 3.0 incorporates advanced filtration technology and robust construction to ensure reliable operation and long service life. Key features include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrecision milled from solid billet aluminum for strength and durability\u003c\/li\u003e\n\u003cli\u003eClear anodized finish for corrosion resistance and a sleek appearance\u003c\/li\u003e\n\u003cli\u003eMultistage filtration system with fine mesh stainless steel screen and aluminum honeycomb filter\u003c\/li\u003e\n\u003cli\u003e3-ounce fluid capacity to trap and hold oil vapors effectively\u003c\/li\u003e\n\u003cli\u003eKnurled tank base for easy removal and draining of collected oil\u003c\/li\u003e\n\u003cli\u003eO-ring seal to prevent leaks and ensure airtight operation\u003c\/li\u003e\n\u003cli\u003eQuick connect PCV fittings for straightforward installation and removal\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for the PCV side of the crankcase ventilation system\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Design:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe oil separator is crafted from a solid billet aluminum block, providing a rugged and reliable housing that withstands the harsh environment of the engine bay. Its clear anodized finish not only enhances corrosion resistance but also allows for easy visual inspection of fluid levels. Inside, a fine mesh stainless steel screen captures the smallest oil vapors, while a thick aluminum honeycomb filter encourages vapor coalescence, causing oil droplets to grow and fall into the reservoir below. This multistage filtration ensures that only clean air is routed back into the intake system, protecting engine components and maintaining optimal combustion.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation \u0026amp; Fitment:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis oil separator is designed as a direct fit replacement for the PCV side on 2019 through 2026 Ram 1500 models equipped with the 3.6L engine. Installation is straightforward, utilizing quick connect fittings that require no special tools or modifications. The knurled base allows for easy draining of collected oil during routine maintenance, recommended every 2,000 to 3,000 miles to ensure peak performance and prevent overflow.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eJ\u0026amp;L Clear Anodized Oil Separator 3.0 PCV Side unit\u003c\/li\u003e\n\u003cli\u003eO-ring seal for leak-free installation\u003c\/li\u003e\n\u003cli\u003eQuick connect PCV fittings pre-installed\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIdeal For:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis oil separator is ideal for Ram 1500 owners who want to maintain engine cleanliness and performance, especially those with forced induction setups such as superchargers or turbochargers. It is also suitable for enthusiasts seeking to reduce intake contamination and preserve fuel quality by preventing oil dilution. Regular maintenance users will appreciate the easy drain design that simplifies upkeep and extends engine life.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48084130037998,"sku":"3126P-C","price":169.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/08aa59adaa49c6b0b3d4774ed3f53953L.jpg?v=1780209945"},{"product_id":"j-l-12-17-jeep-wrangler-jk-3-6l-passenger-side-oil-separator-3-0-black-anodized","title":"J\u0026L Oil Separator Black Anodized (DRIVER): Jeep Wrangler JK 2012-2018 3.6L","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\u003ch2\u003e2012–2017 Jeep Wrangler JK 3.6L V6\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3064D-B\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe J\u0026amp;L Black Anodized Oil Separator is a precision-engineered solution designed to enhance the performance and durability of your 2012–2017 Jeep Wrangler JK equipped with the 3.6L V6 engine. By effectively managing crankcase vapors, this oil separator prevents oil vapor buildup in the intake system, which can degrade fuel octane and cause harmful engine deposits over time. While especially beneficial for forced induction engines, this product is equally valuable for naturally aspirated setups like the Jeep’s 3.6L, helping maintain cleaner intake components and supporting consistent engine efficiency.\u003c\/p\u003e\n\u003cp\u003eSpecifically designed for the passenger side of the engine bay, the J\u0026amp;L Oil Separator captures and condenses oil vapors before they reach the intake manifold. This results in improved throttle response, preserved fuel quality, and long-term engine health—making it an essential upgrade for Jeep enthusiasts who demand reliability and performance in daily driving and off-road conditions.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eIncorporating advanced filtration technology and robust construction, the J\u0026amp;L Oil Separator offers superior crankcase vapor management. Key features include:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMultistage filtration system combining a fine mesh stainless steel screen with a thick aluminum honeycomb filter for exceptional oil vapor separation\u003c\/li\u003e\n  \u003cli\u003eSolid billet aluminum construction with a black anodized finish for enhanced corrosion resistance and durability\u003c\/li\u003e\n  \u003cli\u003eKnurled base tank design allowing easy removal and draining of collected oil without special tools\u003c\/li\u003e\n  \u003cli\u003eO-ring seal ensuring leak-free operation and maintaining system integrity\u003c\/li\u003e\n  \u003cli\u003e3-ounce fluid capacity to support extended maintenance intervals\u003c\/li\u003e\n  \u003cli\u003eQuick-connect PCV fittings for straightforward installation and secure hose connections\u003c\/li\u003e\n  \u003cli\u003eDirect fit for the passenger side PCV system on 2012–2017 Jeep Wrangler JK 3.6L engines\u003c\/li\u003e\n  \u003cli\u003eHelps prevent oil contamination in the intake tract, preserving fuel octane and optimizing engine efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eCrafted from solid billet aluminum, the J\u0026amp;L Oil Separator is built to endure the demands of both daily driving and rugged off-road use. The black anodized finish not only provides a sleek, professional appearance but also offers superior protection against corrosion and wear. Inside, a fine stainless steel mesh screen captures the smallest oil vapors, allowing them to coalesce and drain into the reservoir below. This is complemented by a 1\/2\" thick, 1\/16\" aluminum honeycomb filter that further enlarges vapor droplets, ensuring only clean air returns to the intake manifold.\u003c\/p\u003e\n\u003cp\u003eThe knurled base design facilitates quick and easy maintenance, enabling users to drain collected oil without the need for specialized tools. An O-ring seal guarantees a tight, leak-free fit, maintaining the integrity of the PCV system under all operating conditions.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eThe J\u0026amp;L Oil Separator is engineered as a direct replacement for the passenger side PCV system on Jeep Wrangler JK models from 2012 through 2017 equipped with the 3.6L V6 engine. Installation is simple and requires no modifications to existing intake or engine components. Quick-connect fittings streamline hose attachment and removal, making this upgrade accessible for both professional installers and DIY enthusiasts. Routine maintenance involves draining the collected oil every 2,000 to 3,000 miles to maintain optimal separator performance.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eJ\u0026amp;L Black Anodized Oil Separator (Passenger Side)\u003c\/li\u003e\n  \u003cli\u003ePre-installed O-ring seal\u003c\/li\u003e\n  \u003cli\u003eQuick-connect PCV fittings\u003c\/li\u003e\n  \u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis oil separator is ideal for Jeep Wrangler JK owners who want to maintain engine cleanliness and performance, especially those who frequently drive in demanding environments or have modified their vehicles. It is highly recommended for enthusiasts seeking to prevent intake contamination, preserve fuel quality, and extend engine life without complicated modifications or extensive maintenance.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48092840296686,"sku":"3064D-B","price":169.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/7bab48f2035170a69549aca6b3f27153.jpg?v=1780363846"},{"product_id":"j-l-12-17-jeep-wrangler-jk-3-6l-passenger-side-oil-separator-3-0-clear-anodized","title":"J\u0026L 3.0 Oil Separator Clear Anodized (DRIVER): Jeep Wrangler JK 3.6L 2012-2018","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\u003ch2\u003e2012–2017 Jeep Wrangler JK 3.6L V6\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3064D-C\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe J\u0026amp;L Clear Anodized Oil Separator is a precision-engineered solution designed to enhance the performance and durability of your 2012–2017 Jeep Wrangler JK equipped with the 3.6L V6 engine. By effectively managing crankcase vapors, this oil separator prevents oil vapor buildup in the intake system, which can degrade fuel octane and promote carbon deposits. While especially critical for forced induction engines, this product also benefits naturally aspirated engines like the Jeep’s 3.6L by maintaining cleaner intake air and reducing harmful engine deposits.\u003c\/p\u003e\n\u003cp\u003eSpecifically designed for the passenger side PCV system, the J\u0026amp;L Oil Separator captures and separates oil vapors before they reach the intake manifold. This results in improved engine reliability, smoother operation, and helps preserve fuel quality over time, making it an essential upgrade for Jeep Wrangler owners who demand both daily dependability and off-road capability.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eThe J\u0026amp;L Oil Separator combines advanced filtration technology with durable construction to deliver consistent, long-lasting performance:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMultistage filtration system featuring a fine mesh stainless steel screen to trap microscopic oil vapors\u003c\/li\u003e\n  \u003cli\u003e1\/2\" thick, 1\/16\" aluminum honeycomb filter that efficiently coalesces oil droplets for superior separation\u003c\/li\u003e\n  \u003cli\u003e3-ounce fluid capacity tank designed to collect separated oil and minimize reintroduction into the intake\u003c\/li\u003e\n  \u003cli\u003eClear anodized finish provides corrosion resistance and allows easy visual inspection of fluid levels\u003c\/li\u003e\n  \u003cli\u003eSolid billet aluminum construction ensures strength and durability under harsh driving conditions\u003c\/li\u003e\n  \u003cli\u003eKnurled tank base enables quick and simple removal for draining collected oil\u003c\/li\u003e\n  \u003cli\u003eO-ring seal guarantees a leak-free installation\u003c\/li\u003e\n  \u003cli\u003eQuick-connect PCV fittings facilitate straightforward, clean hookup without permanent modifications\u003c\/li\u003e\n  \u003cli\u003eEngineered specifically for the passenger side PCV system on 2012–2017 Jeep Wrangler JK 3.6L models\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eCrafted from solid billet aluminum, the J\u0026amp;L Oil Separator is built to withstand the demands of both daily driving and rugged off-road use. The clear anodized finish not only resists corrosion but also allows for quick visual monitoring of the oil level inside the separator, helping you maintain optimal performance with ease.\u003c\/p\u003e\n\u003cp\u003eInternally, the separator features a dual-stage filtration system combining a fine stainless steel mesh with a precision-machined aluminum honeycomb filter. This design maximizes the capture of oil vapors while allowing clean air to flow freely back into the intake system, reducing carbon buildup and preserving engine efficiency.\u003c\/p\u003e\n\u003cp\u003eThe integrated 3-ounce tank capacity is ample for typical PCV system oil vapor output, and the knurled base design simplifies routine maintenance by enabling easy draining every 2,000 to 3,000 miles.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eInstallation is straightforward and requires no permanent modifications to your Jeep Wrangler. The unit is designed to fit the passenger side PCV system on all 2012–2017 Jeep Wrangler JK models equipped with the 3.6L V6 engine, including Sport, Sahara, Rubicon, and 75th Anniversary editions, in both standard and Unlimited variants.\u003c\/p\u003e\n\u003cp\u003eThe oil separator connects directly to existing PCV hoses using quick-connect fittings, ensuring a clean, efficient upgrade. Regular draining of the collected oil is recommended to maintain peak performance and prevent overflow.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eJ\u0026amp;L Clear Anodized Oil Separator (Passenger Side)\u003c\/li\u003e\n  \u003cli\u003ePre-installed stainless steel mesh and aluminum honeycomb filter\u003c\/li\u003e\n  \u003cli\u003eO-ring seal for leak prevention\u003c\/li\u003e\n  \u003cli\u003eQuick-connect PCV fittings\u003c\/li\u003e\n  \u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis oil separator is ideal for Jeep Wrangler JK owners who want to maintain engine cleanliness and performance, especially those who frequently drive in demanding conditions or enjoy off-road adventures. It is also perfect for enthusiasts seeking to preserve fuel quality and reduce intake manifold deposits without complex modifications or permanent changes to their vehicle’s PCV system.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48092841246958,"sku":"3064D-C","price":169.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/36a066957714bd1339ada5055b5407e3.jpg?v=1780363848"},{"product_id":"j-l-18-25-jeep-wrangler-jl-3-6l-driver-side-oil-separator-3-0-black-anodized","title":"J\u0026L Oil Separator Co. Oil Catch Can: Jeep Gladiator \/ Wrangler 3.6L V6 2018 - 2024","description":"\u003ch3\u003eJ\u0026amp;L Oil Separator Co. OIL CATCH CAN (BILLET)\u003c\/h3\u003e\u003cp\u003e18-25 Jeep Wrangler 3.6L \n20-25 Jeep Gladiator\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3069D-B - Black Anodized\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e3069D-C - Clear Anodized\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYeah, it's got a Jeep... but does it have an oil separator?  Anyone who owns a 3.6L V6 Dodge or Jeep vehicle knows this is a critical upgrade to prevent oil blow-by from robbing you of performance and causing costly repairs.  Don't worry, J\u0026amp;L Oil Separator Co. has your back!  \n\nOur oil catch cans are custom designed to fit like a glove, look great, and keep your engine running at peak performance.  They come with everything you need right out of the box for an fast and effortless install.\n\nYou get a lifetime warranty too, because our oil separators are that good! \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eJ\u0026amp;L 3.0 Oil Separator\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3oz Capacity\u003c\/li\u003e\n\u003cli\u003eSolid billet construction.\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eDuring the process of venting crankcase pressure back through your intake track, large amounts of oil, in the form of vapors can gather\/accumulate in your intake tube, intake manifold runners and even dilute your gas, lowering its octane level. This happens on all engines and is even worse with forced inducted vehicles (supercharged and turbocharged) as crankcase pressures are increased. To combat this, we have developed an oil separator of our own design. Milled from solid billet aluminum this is a rock-solid piece. It has a knurled tank base for easy removal to drain the spent oil and an O-ring seal to prevent any leaks.\u003c\/p\u003e\u003cp\u003eFiltering consists of a fine mesh stainless steel screen that traps fine oil vapors and releases them once heavy enough to fall. They then pass through a 1\/2\" thick 1\/16th\" aluminum honeycomb filter where they grow every larger and then fall into the bottom. By the time the oil gets through the filter it's too heavy to be passed on into the intake. The tank holds 3 oz of fluid, while that may not sound like a lot, you shouldn’t see that much oil in your PCV system. Drain it every 2000-3000 miles and you will never come close to filling it.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48092842164462,"sku":"3069D-B","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/d73b34a3c70d7fa9a15cb567382714ad.jpg?v=1780363848"},{"product_id":"j-l-18-25-jeep-wrangler-jl-3-6l-driver-side-oil-separator-3-0-clear-anodized","title":"J\u0026L 18-25 Jeep Wrangler JL 3.6L Driver Side Oil Separator 3.0 - Clear Anodized","description":"\u003cp\u003eDuring the process of venting crankcase pressure back through your intake track, large amounts of oil, in the form of vapors can gather\/accumulate in your intake tube, intake manifold runners and even dilute your gas, lowering its octane level. This happens on all engines and is even worse with forced inducted vehicles (supercharged and turbocharged) as crankcase pressures are increased. To combat this, we have developed an oil separator of our own design. Milled from solid billet aluminum this is a rock-solid piece. It has a knurled tank base for easy removal to drain the spent oil and an O-ring seal to prevent any leaks. Filtering consists of a fine mesh stainless steel screen that traps fine oil vapors and releases them once heavy enough to fall. They then pass through a 1\/2\" thick 1\/16th\" aluminum honeycomb filter where they grow every larger and then fall into the bottom. By the time the oil gets through the filter it's too heavy to be passed on into the intake. The tank holds 3 oz of fluid, while that may not sound like a lot, you shouldn’t see that much oil in your PCV system. Drain it every 2000-3000 miles and you will never come close to filling it.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48092843409646,"sku":"3069D-C","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/83336911fe442937bbaae7fce97435c1.jpg?v=1780363849"},{"product_id":"j-l-2021-2025-jeep-wrangler-392-oil-separator-3-0-passenger-side-black-anodized","title":"J\u0026L 3.0 Oil Separator Black Anodized (PASSENGER): Jeep Wrangler Unlimited JL Rubicon 392 6.4L 2021-2024","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\u003ch2\u003e2021–2022 Jeep Wrangler Unlimited Rubicon 392 6.4L\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3072P-B\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe J\u0026amp;L Black Anodized Oil Separator is a precision-engineered solution designed specifically for the passenger side of the 2021 to 2022 Jeep Wrangler Unlimited Rubicon 392 equipped with the 6.4L engine. This high-performance oil separator effectively addresses the common issue of oil vapor buildup within the intake system caused by crankcase ventilation. By separating oil from crankcase vapors before they re-enter the intake, it helps maintain optimal engine performance, fuel quality, and overall engine cleanliness.\u003c\/p\u003e\n\u003cp\u003eIdeal for Jeep enthusiasts who demand reliability and efficiency, this oil separator reduces oil contamination in the intake manifold runners and intake tube, preventing octane dilution and preserving engine power. It is especially beneficial for the Rubicon 392’s naturally aspirated 6.4L V8, where elevated crankcase pressures can lead to increased oil vapor production.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eEngineered with advanced filtration technology and durable materials, the J\u0026amp;L Oil Separator delivers superior performance and long-lasting reliability:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMultistage filtration system featuring a fine mesh stainless steel screen to trap microscopic oil vapors\u003c\/li\u003e\n  \u003cli\u003e1\/2\" thick, 1\/16\" aluminum honeycomb filter that coalesces oil droplets for efficient separation\u003c\/li\u003e\n  \u003cli\u003e3-ounce fluid capacity to collect and hold separated oil before draining\u003c\/li\u003e\n  \u003cli\u003eKnurled tank base for easy removal and mess-free draining of collected oil\u003c\/li\u003e\n  \u003cli\u003eO-ring seal ensures a leak-free, secure installation\u003c\/li\u003e\n  \u003cli\u003eBlack anodized finish provides corrosion resistance and a sleek under-hood appearance\u003c\/li\u003e\n  \u003cli\u003eDirect-fit design tailored exclusively for the passenger side of the Jeep Wrangler Unlimited Rubicon 392 (2021–2022)\u003c\/li\u003e\n  \u003cli\u003eHelps maintain fuel octane and engine cleanliness by preventing oil vapor contamination\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\u003cp\u003eCrafted from solid billet aluminum, the J\u0026amp;L Oil Separator offers exceptional strength and durability to withstand the demanding conditions of off-road and high-performance driving. The black anodized finish not only enhances corrosion resistance but also delivers a professional, high-quality look under the hood.\u003c\/p\u003e\n\u003cp\u003eThe internal filtration system combines a fine stainless steel mesh with a precision-machined aluminum honeycomb filter, engineered to capture the smallest oil vapors and allow only clean air to pass through. The separator’s knurled base design facilitates effortless removal for routine maintenance, while the O-ring seal guarantees a tight, leak-free fit for reliable operation over time.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\u003cp\u003eThis oil separator is a direct-fit replacement designed exclusively for the passenger side of the 2021 to 2022 Jeep Wrangler Unlimited Rubicon 392 with the 6.4L engine. Installation requires no modifications and can be completed quickly using basic hand tools. The unit integrates seamlessly with the existing PCV system, providing a hassle-free upgrade that enhances engine performance and longevity.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eJ\u0026amp;L Black Anodized Oil Separator (Passenger Side)\u003c\/li\u003e\n  \u003cli\u003eO-ring seal\u003c\/li\u003e\n  \u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal For\u003c\/h3\u003e\n\u003cp\u003eThis oil separator is ideal for Jeep Wrangler Unlimited Rubicon 392 owners who want to maintain peak engine efficiency and protect their intake system from oil vapor contamination. It is especially suited for enthusiasts who drive aggressively or use their vehicles in demanding conditions, where crankcase pressures and oil vapor production are higher than average. By preventing oil vapor buildup, it helps preserve engine power, fuel quality, and overall reliability.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48092844327150,"sku":"3072P-B","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/2471748cb7efce10d3a918b878e22a52.jpg?v=1780363851"},{"product_id":"j-l-20-26-chevy-silverado-gmc-sierra-2500-3500-6-6l-drivers-side-oil-separator-3-0-black-anodi","title":"J\u0026L 20-26 Chevy Silverado \/ GMC Sierra 2500HD \/ 3500HD Oil Separator | Chevrolet Silverado \/ GMC Sierra (20-26) (3089D-B)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2020–2026 Chevrolet Silverado and GMC Sierra 2500HD \/ 3500HD\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3089D-B\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L Oil Separator is a high-quality, billet aluminum component designed to improve the efficiency of your vehicle’s crankcase ventilation system. Specifically engineered for 2020 to 2026 Chevrolet Silverado and GMC Sierra 2500HD and 3500HD models, this oil separator helps prevent oil vapors from entering your intake system, which can reduce performance and fuel quality. Crafted from solid billet aluminum, it offers durability and a premium feel, making it an ideal upgrade for truck enthusiasts seeking to maintain optimal engine health and performance.\u003c\/p\u003e\n\n\u003cp\u003eThis oil separator is designed for those who want a reliable, long-lasting solution to oil vapor management. It supports cleaner intake airflow, reduces oil buildup in the intake manifold, and helps maintain higher octane levels by preventing oil dilution. Its robust construction and thoughtful design make it a practical addition for daily drivers and performance-oriented trucks alike.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L Oil Separator combines innovative design with durable materials to deliver effective crankcase vapor management. Key features include:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstructed from solid billet aluminum for strength and longevity\u003c\/li\u003e\n  \u003cli\u003eKnurled tank base for easy removal and draining of accumulated oil\u003c\/li\u003e\n  \u003cli\u003eO-ring seal to prevent leaks and ensure a secure fit\u003c\/li\u003e\n  \u003cli\u003eFiltering system with a fine mesh stainless steel screen to trap oil vapors\u003c\/li\u003e\n  \u003cli\u003eAluminum honeycomb filter that grows larger oil particles for efficient separation\u003c\/li\u003e\n  \u003cli\u003eTank capacity of 3 oz, requiring minimal maintenance\u003c\/li\u003e\n  \u003cli\u003eDesigned to support forced induction vehicles with increased crankcase pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\n\u003cp\u003eThis oil separator is milled from solid billet aluminum, providing a sturdy and corrosion-resistant housing. Its knurled base allows for easy removal to drain the collected oil, while the O-ring seal ensures a leak-free operation. The filtering system combines a fine mesh stainless steel screen with a thick aluminum honeycomb filter, effectively trapping and growing larger oil vapors before they can reach your intake system.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\n\u003cp\u003eDesigned as a direct bolt-on upgrade, this oil separator installs easily onto compatible Silverado and Sierra models from 2020 to 2026. Proper installation ensures optimal performance and maintenance, with minimal downtime.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\n\u003cp\u003eThe package includes the billet aluminum oil separator unit, mounting hardware, and detailed installation instructions to facilitate a straightforward upgrade process.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48093075833070,"sku":"3089D-B","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/1a751f47ca60e737493638cd7a3deff7.jpg?v=1780368333"},{"product_id":"j-l-20-26-chevy-silverado-gmc-sierra-2500-3500-6-6l-drivers-side-oil-separator-3-0-clear-anodi","title":"J\u0026L 20-26 Chevy Silverado\/GMC Sierra 2500\/3500 6.6L Drivers Side Oil Separator | Chevrolet Silverado (20-26) \/ GMC Sierra (20-26) (3089D-C)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2020–2026 Chevrolet Silverado 2500\/3500 and GMC Sierra 2500\/3500 with 6.6L Engines\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3089D-C\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L 20-26 Chevy Silverado and GMC Sierra 6.6L Driver's Side Oil Separator is a high-quality, billet aluminum component designed to improve your vehicle’s crankcase ventilation system. Crafted for truck owners seeking durability and reliable oil management, this oil separator helps prevent oil vapors from entering your intake system, which can lead to reduced octane levels and potential engine deposits. Its robust construction and thoughtful design make it an excellent upgrade for those looking to maintain optimal engine performance and cleanliness.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003eConstructed from solid billet aluminum for strength and longevity\u003c\/li\u003e\n\u003cli\u003eKnurled tank base for easy removal and draining of accumulated oil\u003c\/li\u003e\n\u003cli\u003eO-ring seal to ensure a leak-proof connection\u003c\/li\u003e\n\u003cli\u003eFine mesh stainless steel screen traps oil vapors effectively\u003c\/li\u003e\n\u003cli\u003e1\/2\" thick aluminum honeycomb filter enlarges and captures oil particles\u003c\/li\u003e\n\u003cli\u003eTank capacity of 3 oz, reducing the need for frequent maintenance\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for the driver’s side of the engine bay in compatible trucks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\n\u003cp\u003eThis oil separator is milled from solid billet aluminum, providing a durable and corrosion-resistant housing. Its knurled base allows for easy removal to drain the collected oil, while the O-ring seal guarantees a secure, leak-free fit. The internal filtering system combines a fine mesh stainless steel screen with a thick aluminum honeycomb filter, ensuring efficient separation of oil vapors before they can reach your intake system. The compact yet effective design makes it a reliable addition to your vehicle’s crankcase ventilation setup.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\n\u003cp\u003eDesigned as a direct bolt-on upgrade, this oil separator installs on the driver’s side of your Silverado or Sierra with minimal effort. Proper installation ensures optimal sealing and filtration, helping to maintain engine cleanliness and performance over time. Regular draining of the separator every 2000-3000 miles will prevent oil buildup and keep your vehicle running smoothly.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\n\u003cp\u003eThis package includes the billet aluminum oil separator unit, O-ring seal, and all necessary hardware for installation.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48093076652270,"sku":"3089D-C","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/8524705bab39b248b51bcd47c999522f.jpg?v=1780368334"},{"product_id":"j-l-19-23-chevy-silverado-gmc-sierra-1500-2-7l-passenger-side-oil-separator-3-0-black-anodized","title":"J\u0026L 19-23 Chevy Silverado\/GMC Sierra 1500 2.7L Passenger Side Oil Separator | Chevrolet Silverado 1500 \/ GMC Sierra 1500 (19-26) (3093P-B)","description":"\u003ch1\u003eJ\u0026amp;L Oil Separator\u003c\/h1\u003e\n\n\u003ch2\u003eFits 2019–2026 Chevrolet Silverado 1500 and GMC Sierra 1500 with 2.7L Engine\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003ePart #:\u003c\/strong\u003e 3093P-B\u003c\/p\u003e\n\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\n\u003cp\u003eThe J\u0026amp;L Passenger Side Oil Separator is a high-quality, billet aluminum component designed to help keep your engine's intake system clean and free of oil vapors. Specifically engineered for the 2019-2023 Chevy Silverado and GMC Sierra 1500 models with 2.7L engines, this oil separator effectively captures oil vapors before they can contaminate your intake manifold and dilute your fuel. It is ideal for truck owners seeking to maintain optimal engine performance, reduce carbon buildup, and improve overall engine longevity. Crafted from solid billet aluminum, this separator offers durability and a premium look, ensuring long-lasting performance under demanding driving conditions.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eConstructed from solid billet aluminum for strength and durability\u003c\/li\u003e\n  \u003cli\u003eKnurled tank base allows easy removal for draining accumulated oil\u003c\/li\u003e\n  \u003cli\u003eO-ring seal prevents leaks and ensures a secure fit\u003c\/li\u003e\n  \u003cli\u003eFine mesh stainless steel screen traps oil vapors efficiently\u003c\/li\u003e\n  \u003cli\u003eIncludes a 1\/2\" thick aluminum honeycomb filter to grow and trap heavier oil particles\u003c\/li\u003e\n  \u003cli\u003eTank capacity of 3 oz, reducing the need for frequent maintenance\u003c\/li\u003e\n  \u003cli\u003eDesigned for passenger side installation on GM trucks\u003c\/li\u003e\n  \u003cli\u003eSupports maintaining clean intake systems and optimal engine response\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Design\u003c\/h3\u003e\n\n\u003cp\u003eThis oil separator is milled from solid billet aluminum, providing a robust and corrosion-resistant structure. The knurled base ensures easy removal for draining, while the O-ring seal guarantees a leak-free operation. The combination of stainless steel mesh and aluminum honeycomb filter effectively captures and separates oil vapors, preventing them from entering your intake system and helping to maintain peak engine efficiency.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Fitment\u003c\/h3\u003e\n\n\u003cp\u003eDesigned for straightforward installation on the passenger side of your vehicle, this separator integrates seamlessly with the existing PCV system. Proper maintenance involves draining the collected oil every 2,000 to 3,000 miles, ensuring continuous optimal performance without the need for complex modifications or tools.\u003c\/p\u003e\n\n\u003ch3\u003eWhat’s Included\u003c\/h3\u003e\n\n\u003cp\u003eThis product includes the billet aluminum oil separator unit, O-ring seal, and necessary hardware for installation.\u003c\/p\u003e","brand":"J\u0026L","offers":[{"title":"Default Title","offer_id":48093077438702,"sku":"3093P-B","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1996\/5678\/files\/af00dd5270ee0d703fa610c9953c49ca.jpg?v=1780368335"}],"url":"https:\/\/www.ironridgeoffroad.com\/collections\/j-l.oembed?page=2","provider":"Iron Ridge Offroad","version":"1.0","type":"link"}