Skip to content
BLACK FRIDAY SALE | Save 10% on Orders $150+ with Code: BLACKFRIDAY
BLACK FRIDAY SALE | Save 10% on Orders $150+ with Code: BLACKFRIDAY
aFe POWER Momentum GT cold air intake with Pro 5R filter for the 2024–2026 Ford Ranger 2.7L EcoBoost

2024–2026 Ford Ranger 2.7L Intake: Fitment Checks Before You Order

A 2024–2026 Ranger can have more than one engine under the hood, and that detail matters when you’re shopping for an intake. The easiest way to avoid ordering the wrong one is to start with the engine and part number, then check the rest of the application.

aFe POWER Momentum GT cold air intake with Pro 5R filter for the 2024–2026 Ford Ranger 2.7L EcoBoost

Start with the engine, not the model name

The aFe POWER Momentum GT kit featured here is listed for the 2024–2026 Ford Ranger with the 2.7L EcoBoost. Its part number is 50-70136R. aFe identifies the application by engine, and its product information lists a separate intake for the 2.3L Ranger and another for the 3.0L Ranger Raptor. Those kits aren’t interchangeable just because the trucks share a model name.

See the aFe POWER Momentum GT intake for the 2024–2026 Ranger 2.7L

What’s useful about this setup?

This is a sealed intake system with a washable, reusable Pro 5R filter. The listing also notes a clear inspection window, silicone couplings, stainless-steel clamps, and use of factory mounting locations. That gives you a few practical details to compare when deciding whether a complete intake kit makes sense for your daily driver, tow rig, or weekend trail truck.

Three checks before you order

  • Confirm the engine: Check your truck’s engine, not just its year or trim badge.
  • Match the part number: This 2.7L Pro 5R version is 50-70136R. If you’re looking at another Ranger engine, verify that engine-specific kit instead.
  • Think about filter care: This kit uses a washable, reusable filter. Follow aFe’s maintenance instructions when servicing it.

If you’re not sure which Ranger engine you have, send us the model year, trim, and engine before ordering. A quick fitment check is easier than discovering the mismatch after the box arrives.

Fitment shown is based on the manufacturer application information and the product listing. Always confirm your vehicle configuration and part number before purchase.

Previous article Bronco rock sliders: two-door vs four-door fitment
Next article Does your Tacoma lift kit need upper control arms?