Skip to content
Search
Clear filters
Bilstein B8 5100 Rear Shock – Right, 1–1.5 in Lift | Toyota Tacoma (96-04) (33-247717)
Bilstein B8 5100 Rear Shock – Right, 1–1.5 in Lift | Toyota Tacoma (96-04) (33-247717)
Bilstein B8 5100 Rear Shock – Right, 1–1.5 in Lift | Toyota Tacoma (96-04) (33-247717)

Bilstein B8 5100 Rear Shock – Right, 1–1.5 in Lift | Toyota Tacoma (96-04) (33-247717)

SKU 33-247717
Save 28% Save 28%
$171.85
$171.85 - $171.85
$171.85
$123.00
$123.00 - $123.00
$123.00
  Lease to own   Pay as low as   $/week
Availability:
in stock, ready to be shipped

YearsMakeModelEngineTrim / drive / positionLift / restrictions
1996–2004ToyotaTacomaL4 2.7LSubModel:Base; Drive:4WD; Position:Rear RightFits Vehicles With 1-1.5" Rear Lift;A minimum 1" lift block is required for this application
1996–2004ToyotaTacomaV6 3.4LSubModel:Base; Drive:4WD; Position:Rear RightFits Vehicles With 1-1.5" Rear Lift;A minimum 1" lift block is required for this application
1996–1997ToyotaTacomaSubModel:SR5; Position:Rear RightFits Vehicles With 1-1.5" Rear Lift;A minimum 1" lift block is required for this application
1998–2000ToyotaTacomaSubModel:Limited; Position:Rear RightFits Vehicles With 1-1.5" Rear Lift;A minimum 1" lift block is required for this application
1998–2004ToyotaTacomaSubModel:Pre Runner; Position:Rear RightFits Vehicles With 1-1.5" Rear Lift;A minimum 1" lift block is required for this application
1998–2000ToyotaTacomaL4 2.7LSubModel:SR5; Drive:4WD; Position:Rear RightFits Vehicles With 1-1.5" Rear Lift;A minimum 1" lift block is required for this application
1998–2000ToyotaTacomaV6 3.4LSubModel:SR5; Drive:4WD; Position:Rear RightFits Vehicles With 1-1.5" Rear Lift;A minimum 1" lift block is required for this application

Part #: 33-247717

Overview

Replace the specified damper with a vehicle-tuned Bilstein B8 5100 Rear. Match its mounting position and suspension height to the application table before ordering.

Key Features

  • Internal Design: Monotube
  • Piston Diameter: 46mm
  • Adjustable Damping: Non-Adjustable

Construction & Design

Monotube construction with zinc plated. Body outside diameter: 2.0 in.. Collapsed/extended length: 14.07 / 22.09 in.

Installation & Fitment

Right rear; 1–1.5 in lift. A minimum 1 in rear lift block is required. Follow the installation instructions; front suspension work requires an alignment check.

What's Included

One shock absorber; springs, lift blocks and other suspension components are not included.
Free Shipping

When you spend $250+

Warranty Info

Offering a range of policies

Need Help?

Contact our support team today

Find a retailer

Locate the right inventory