ICON Stage 7 Suspension System w/ Billet UCA – Ford Ranger

2019–2023 Ford Ranger 2.3L EcoBoost | 0–3.5” Lift | CDCV Coilovers + Billet UCA + Leaf Pack | SKU: K93207A

Take your Ranger to the highest level of performance with the ICON Vehicle Dynamics Stage 7 Suspension System (K93207A). Designed for the 2019–2023 Ford Ranger, this is ICON’s most complete system, delivering maximum adjustability, increased load handling, and elite off-road capability.

At the core are 2.5 Series extended travel coilovers with remote reservoirs and CDCV (Compression Damping Control Valves), engineered to increase oil capacity and reduce heat fade. These shocks allow you to fine-tune compression damping for street comfort, overlanding weight, or aggressive off-road driving.

Included CNC-machined billet aluminum upper control arms correct suspension geometry, improve alignment range, and maximize wheel travel. ICON’s patented Delta Joint combines the durability of a ball joint with the articulation of a uniball for long-lasting, low-maintenance performance. 

Out back, the system features ICON 2.5 piggyback reservoir rear shocks with CDCV adjusters, a rear bump stop kit, and multi-rate rear leaf springs designed to improve ride quality while supporting additional weight from gear, armor, or towing. 

---

Key Features

• Direct fit for 2019–2023 Ford Ranger
• SKU: K93207A
• Stage 7 complete suspension system
• 0–3.5” adjustable front lift via coilovers
• 2.5 Series remote reservoir coilovers w/ CDCV adjusters
• Billet aluminum upper control arms w/ Delta Joint
• 2.5 piggyback reservoir rear shocks w/ CDCV
• Includes rear bump stop kit
• Includes multi-rate rear leaf spring pack
• Up to ~35% increase in front wheel travel
• Maximum performance, adjustability, and load handling

---

⚠️ Fitment Note (IMPORTANT)

❗ Fits 2019–2023 Ford Ranger 2.3L EcoBoost
❗ Compatible with 2WD & 4WD models
❗ Designed for 0–3.5” lift applications
❗ Designed for aluminum knuckle/spindle configuration
❗ Supports up to ~33–35” tires depending on setup
❗ Alignment required after installation
❗ Professional installation recommended

---

Adjustable Lift & Stance

• 0–3.5” adjustable front lift
• Eliminates factory rake
• Supports aggressive wheel and tire setups

👉 Dial in a fully custom stance

---

CDCV Adjustable Damping (Stage 7 Advantage)

• External compression adjusters front and rear
• Tune suspension for street, trail, or high-speed off-road
• Adapts to terrain and vehicle weight instantly

👉 Maximum control in any condition

---

Leaf Pack Upgrade (Load Handling)

• Multi-rate rear leaf springs improve ride quality
• Handles added weight from gear, armor, rooftop tents
• Optional add-a-leaf increases load capacity further

👉 Built for overlanding and fully built trucks

---

Remote Reservoir Performance

• Increased oil and nitrogen capacity
• Reduced heat fade under extreme use
• Consistent damping in demanding conditions

👉 Designed for sustained off-road abuse

---

Billet UCA Strength & Precision

• CNC-machined 6061 billet aluminum construction
• On-vehicle camber and caster adjustment
• Improves durability and suspension clearance

👉 Premium strength with precision geometry correction

---

Delta Joint Advantage

• High-angle articulation without bind
• Sealed, greaseable, and low maintenance
• Combines ball joint durability with uniball performance

👉 Built for long-term reliability

---

Maximum Suspension Travel

• Up to ~35% increase in front wheel travel
• Improved droop and articulation
• Enhanced traction off-road

👉 Maximum capability for serious terrain

---

Rear Performance & Bottom-Out Control

• 2.5 piggyback reservoir shocks with CDCV
• Improved damping and stability
• Rear bump stop kit reduces harsh impacts

👉 Controlled performance under load and speed

---

Installation

Direct bolt-on system
Includes coilovers, control arms, rear shocks, bump stops, and leaf springs
Professional installation recommended
Alignment required after install
Typical install time: ~6–8 hours

---

What’s Included

• Front 2.5 remote reservoir coilovers w/ CDCV (pair)
• Billet upper control arms w/ Delta Joints (pair)
• Rear 2.5 piggyback reservoir shocks w/ CDCV (pair)
• Multi-rate rear leaf spring pack
• Rear bump stop kit
• Mounting hardware
• Installation instructions

---

Specifications

• Series: ICON Stage 7 (Billet)
• Lift Range: 0–3.5” Front
• Front Shocks: 2.5 Series Remote Reservoir w/ CDCV
• Rear Shocks: 2.5 Piggyback Reservoir w/ CDCV
• Rear Springs: Multi-Rate Leaf Pack
• Control Arms: Billet Aluminum w/ Delta Joint
• Adjustability: Ride Height + Compression Damping
• Travel Increase: Up to ~35% Front

---

Popular Vehicle Applications

👉 2019–2023 Ford Ranger

Perfect for Ranger owners looking for the most complete and capable suspension system available, combining adjustability, load handling, and off-road performance in one package.

👉 Ultimate ICON system for fully built Ranger setups

---

Why Buy from Iron Ridge Offroad

✔ Fast Shipping
✔ Fast Processing
✔ Off-Road Experts You Can Trust
✔ Premium Brands & Proven Products

---

Upgrade your Ranger with the ICON Stage 7 Suspension System (K93207A) engineered for ultimate performance, adjustability, and real-world capability.