Vendor: ICON
ICON 0-3.5 in Stage 7 Suspension System w/ Tubular UCA Alum Knuckle - 2019-2023 Ford Ranger
ICON 0-3.5 in Stage 7 Suspension System w/ Tubular UCA Alum Knuckle - 2019-2023 Ford Ranger
Couldn't load pickup availability
Part Description
Part Description
ICON Stage 7 Suspension System w/ Tubular UCA – Ford Ranger
2019–2023 Ford Ranger 2.3L EcoBoost | 0–3.5” Lift | CDCV Coilovers + Tubular UCA + Leaf Pack | SKU: K93207TA
Take your Ranger to the absolute highest level of performance with the ICON Vehicle Dynamics Stage 7 Suspension System (K93207TA). Designed for the 2019–2023 Ford Ranger, this system delivers maximum adjustability, increased load handling, and elite off-road capability for serious builds.
At the core of this system are 2.5 Series extended travel front coilovers with remote reservoirs and CDCV (Compression Damping Control Valves). These shocks allow you to fine-tune compression damping for street comfort, overland loads, or aggressive off-road driving while maintaining consistent performance under heat and stress.
Included ICON tubular upper control arms with patented Delta Joints correct suspension geometry, improve alignment range, and allow full suspension articulation without bind.
Out back, the system features ICON 2.5 piggyback reservoir rear shocks with CDCV adjusters, a rear bump stop kit, and a major upgrade over all lower stages, multi-rate rear leaf springs designed to support added weight while improving ride quality and rear suspension performance.
Key Features
- Direct fit for 2019–2023 Ford Ranger
- SKU: K93207TA
- Stage 7 complete suspension system
- 0–3.5” adjustable front lift via coilovers
- 2.5 Series remote reservoir coilovers w/ CDCV adjusters
- Tubular upper control arms w/ Delta Joint
- 2.5 piggyback reservoir rear shocks w/ CDCV
- Includes rear bump stop kit
- Includes multi-rate rear leaf spring pack
- Up to ~35% increase in front wheel travel
- Maximum performance, adjustability, and load handling
⚠️ Fitment Note (IMPORTANT)
❗ Fits 2019–2023 Ford Ranger 2.3L EcoBoost
❗ Compatible with 2WD & 4WD models
❗ Designed for 0–3.5” lift applications
❗ Designed for aluminum knuckle/spindle configuration
❗ Supports up to ~33–35” tires depending on setup
❗ Alignment required after installation
❗ Professional installation recommended
Adjustable Lift & Stance
- 0–3.5” adjustable front lift
- Eliminates factory rake
- Supports aggressive wheel and tire setups
👉 Dial in a fully custom stance
CDCV Adjustable Damping (Stage 7 Advantage)
- External compression adjusters front and rear
- Tune suspension for street, trail, or high-speed off-road
- Adapts to vehicle weight and terrain instantly
👉 Maximum control in any condition
Leaf Pack Upgrade (Load Handling)
- Multi-rate rear leaf springs improve ride quality
- Handles added weight from gear, armor, rooftop tents
- Improves rear suspension balance and stability
👉 Built for overlanding and fully built trucks
Remote Reservoir Performance
- Increased oil and nitrogen capacity
- Reduced heat fade under extreme use
- Consistent damping in demanding conditions
👉 Designed for sustained off-road performance
Tubular UCA Strength & Geometry
- Heavy-duty DOM steel construction
- Built-in caster correction for alignment
- Increases suspension travel and clearance
👉 Proven durability with performance geometry correction
Delta Joint Advantage
- High-angle articulation without bind
- Sealed, greaseable, and long-lasting
- Combines ball joint durability with uniball performance
👉 Built for real-world reliability
Maximum Suspension Travel
- Up to ~35% increase in front wheel travel
- Improved droop and articulation
- Enhanced traction off-road
👉 Maximum capability for serious terrain
Rear Performance & Bottom-Out Control
- 2.5 piggyback reservoir shocks with CDCV
- Improved damping and stability
- Rear bump stop kit reduces harsh impacts
👉 Controlled performance under load and speed
Installation
Direct bolt-on system
Includes coilovers, control arms, rear shocks, bump stops, and leaf springs
Professional installation recommended
Alignment required after install
Typical install time: ~6–8 hours
What’s Included
- Front 2.5 remote reservoir coilovers w/ CDCV (pair)
- Tubular upper control arms w/ Delta Joints (pair)
- Rear 2.5 piggyback reservoir shocks w/ CDCV (pair)
- Multi-rate rear leaf spring pack
- Rear bump stop kit
- Mounting hardware
- Installation instructions
Specifications
- Series: ICON Stage 7 (Tubular)
- Lift Range: 0–3.5” Front
- Front Shocks: 2.5 Series Remote Reservoir w/ CDCV
- Rear Shocks: 2.5 Piggyback Reservoir w/ CDCV
- Rear Springs: Multi-Rate Leaf Pack
- Control Arms: Tubular w/ Delta Joint
- Adjustability: Ride Height + Compression Damping
- Travel Increase: Up to ~35% Front
Popular Vehicle Applications
👉 2019–2023 Ford Ranger
Perfect for Ranger owners looking for the most complete and capable suspension system available, combining adjustability, load handling, and off-road performance in one package.
👉 Ultimate all-in-one ICON system for fully built trucks
Why Buy from Iron Ridge Offroad
✔ Fast Shipping
✔ Fast Processing
✔ Off-Road Experts You Can Trust
✔ Premium Brands & Proven Products
Upgrade your Ranger with the ICON Stage 7 Suspension System (K93207TA) engineered for ultimate performance, adjustability, and real-world capability.