Vendor: ICON
ICON 0-3.5 in Stage 8 Suspension System w/ Tubular UCA Alum Knuckle - 2019-2023 Ford Ranger
ICON 0-3.5 in Stage 8 Suspension System w/ Tubular UCA Alum Knuckle - 2019-2023 Ford Ranger
Couldn't load pickup availability
Part Description
Part Description
ICON Stage 8 Suspension System w/ Tubular UCA – Ford Ranger
2019–2023 Ford Ranger 2.3L EcoBoost | 0–3.5” Lift | CDCV Coilovers + Tubular UCA + Leaf Pack | SKU: K93208TA
Take your Ranger to the ultimate level of performance with the ICON Vehicle Dynamics Stage 8 Suspension System (K93208TA). Designed for the 2019–2023 Ford Ranger, this is ICON’s most advanced complete system, delivering maximum adjustability, increased load handling, and elite off-road capability.
At the core are 2.5 Series extended travel coilovers with remote reservoirs and CDCV (Compression Damping Control Valves), engineered to increase oil capacity and reduce heat fade for consistent performance under extreme conditions. These shocks allow you to fine-tune compression damping for street comfort, overlanding weight, or aggressive high-speed off-road driving.
Included ICON tubular upper control arms with patented Delta Joints correct suspension geometry, increase caster, and allow full suspension articulation without bind improving both handling and durability.
Out back, the system features ICON 2.5 piggyback reservoir rear shocks with CDCV adjusters, a rear bump stop kit, and multi-rate rear leaf springs designed to improve ride quality while supporting added weight from gear, armor, or towing.
Key Features
- Direct fit for 2019–2023 Ford Ranger
- SKU: K93208TA
- Stage 8 complete suspension system
- 0–3.5” adjustable front lift via coilovers
- 2.5 Series remote reservoir coilovers w/ CDCV adjusters
- Tubular upper control arms w/ Delta Joint
- 2.5 piggyback reservoir rear shocks w/ CDCV
- Includes rear bump stop kit
- Includes multi-rate rear leaf spring pack
- Up to ~35% increase in front wheel travel
- Maximum performance, adjustability, and load handling
⚠️ Fitment Note (IMPORTANT)
❗ Fits 2019–2023 Ford Ranger 2.3L EcoBoost
❗ Compatible with 2WD & 4WD models
❗ Designed for 0–3.5” lift applications
❗ Designed for aluminum knuckle/spindle configuration
❗ Supports up to ~33–35” tires depending on setup
❗ Alignment required after installation
❗ Professional installation recommended
Adjustable Lift & Stance
- 0–3.5” adjustable front lift
- Eliminates factory rake
- Supports aggressive wheel and tire setups
👉 Dial in a fully custom stance
CDCV Adjustable Damping (Stage 8 Advantage)
- External compression adjusters front and rear
- Fine-tune ride from soft to firm
- Adapts instantly to terrain and vehicle load
👉 Maximum control in any condition
Leaf Pack Upgrade (Load Handling)
- Multi-rate rear leaf springs improve ride quality
- Designed for overlanding, towing, and heavy builds
- Adjustable spring rate via add-in leaf design
👉 Built for fully equipped trucks
Remote Reservoir Performance
- Increased oil and nitrogen capacity
- Reduced heat fade under extreme use
- Consistent damping during aggressive driving
👉 Designed for sustained off-road abuse
Tubular UCA Strength & Geometry
- Heavy-duty DOM steel construction
- Built-in caster correction improves alignment
- Increases suspension travel and clearance
👉 Proven durability with performance geometry correction
Delta Joint Advantage
- High-angle articulation without bind
- Sealed, greaseable, and long-lasting
- Combines ball joint durability with uniball performance
👉 Built for real-world reliability
Maximum Suspension Travel
- Up to ~35% increase in front wheel travel
- Improved droop and articulation
- Enhanced traction off-road
👉 Maximum capability for serious terrain
Rear Performance & Bottom-Out Control
- 2.5 piggyback reservoir shocks with CDCV
- Improved damping and stability
- Rear bump stop kit reduces harsh impacts
👉 Controlled performance under load and speed
Installation
Direct bolt-on system
Includes coilovers, control arms, rear shocks, bump stops, and leaf springs
Professional installation recommended
Alignment required after install
Typical install time: ~6–8 hours
What’s Included
- Front 2.5 remote reservoir coilovers w/ CDCV (pair)
- Tubular upper control arms w/ Delta Joints (pair)
- Rear 2.5 piggyback reservoir shocks w/ CDCV (pair)
- Multi-rate rear leaf spring pack
- Rear bump stop kit
- Mounting hardware
- Installation instructions
Specifications
- Series: ICON Stage 8 (Tubular)
- Lift Range: 0–3.5” Front
- Front Shocks: 2.5 Series Remote Reservoir w/ CDCV
- Rear Shocks: 2.5 Piggyback Reservoir w/ CDCV
- Rear Springs: Multi-Rate Leaf Pack
- Control Arms: Tubular w/ Delta Joint
- Adjustability: Ride Height + Compression Damping
- Travel Increase: Up to ~35% Front
Popular Vehicle Applications
👉 2019–2023 Ford Ranger
Perfect for Ranger owners looking for the most advanced and capable suspension system available, combining adjustability, load handling, and maximum off-road performance in one package.
👉 Ultimate ICON system for fully built Ranger setups
Why Buy from Iron Ridge Offroad
✔ Fast Shipping
✔ Fast Processing
✔ Off-Road Experts You Can Trust
✔ Premium Brands & Proven Products
Upgrade your Ranger with the ICON Stage 8 Suspension System (K93208TA) engineered for ultimate performance, adjustability, and real-world capability.