Skip to content
BLACK FRIDAY SALE | Save 10% on Orders $150+ with Code: BLACKFRIDAY
BLACK FRIDAY SALE | Save 10% on Orders $150+ with Code: BLACKFRIDAY

ReadyLIFT 2.5" Front / 1.5" Rear SST Lift Kit | Toyota Sequoia (01-07) (69-5010)

SKU R90695010
Sold out
Original price $469.95 - Original price $469.95
Original price
$469.95
$469.95 - $469.95
Current price $469.95
Availability:
Out of stock
YearsMakeModel
2001-2007ToyotaSequoia

ReadyLIFT 2.5" Front / 1.5" Rear SST Lift Kit

Part #: 69-5010

Overview

The ReadyLIFT 2.5" Front / 1.5" Rear SST Lift Kit is a front-and-rear suspension system developed for Toyota Sequoia (01-07). This kit provides the owner with the opportunity to upgrade to larger wheel and tire combinations up to 33" in diameter while retaining the great stock ride and handling characteristics.

Key Features

  • Fits Toyota Sequoia (01-07)
  • Provides 2.5" front / 1.5" rear of lift
  • Front and rear suspension application
  • Fits 2WD/4WD models
  • 2001-07 TOYOTA SEQUOIA 2WD/4WD SST LIFT KIT Max Lift 2.5"F/1.5"R
  • Max Tire Diameter 33" INCLUDES DIFFERENTIAL DROP SPACER KIT
  • Note: Rear spacer is only compatible with one of three Toyota Sequoia rear suspension designs
  • This spacer is intended to bolt to the frame

Construction & Design

This is a complete suspension lift kit that includes powder coated steel strut extensions, front differential drop spacers, skid plate spacers and special-designed rear spring lift spacers.

Installation & Fitment

Fits: Toyota Sequoia (01-07)
Lift Height: 2.5" Front / 1.5" Rear
Position: Front and rear
Drive Type: 2WD/4WD
Installation Time: Approximately 6 hours
Professional Installation: Highly recommended by ReadyLIFT
Alignment: Required after installation
Important Notes/Exclusions: Unlike other kits, the ReadyLIFT 2.5" suspension system requires no cutting or strut spring pre-loading and installs quickly and safely using the provided heavy-duty hardware. Not for use with rear air bag suspension.

What's Included

  • Strut Extension 2.5" Lift - Front
  • M10-1.25 Serrated Flange Nut - Front
  • Differential Drop Kit - Front
  • Skid Plate Spacer Kit - Front
  • Coil Spacer 1.5" Lift - Rear
  • M14-2.0 35mm Hex Head Bolt Class 10.9
  • M14Flat Washer
  • M14-2.0 Nyloc Nut
  • 1. 2
  • Unbolt the sway bar end link. Remove the four lower ball Remove the three upper strut mounting nuts. Remove
  • Remove the lower strut mounting bolt. tension using the OEM nuts
  • Repeat steps 1 through 3 on the Passenger
  • Side of the vehicle. Then re-install the sway
  • bar nuts on both sides after the lower ball
  • joints have been re-attached. Follow each
  • step closely, making sure to double
  • check the torque on all fasteners
  • Re-install the strut into its stock location using the nuts
  • provided. Use a floor jack to raise the lower A-arm in
  • order to re-install the lower ball joint bolts
  • 2000-2007 Toyota Sequoia 2WD/4WD
  • 5. 6
  • Remove the front skid plate and save the OEM hardware. Slowly lower the jack to allow the differential to rotate down
  • Support the front differential with a jack and remove the two Place the 1" tall steel spacers between the frame and torque
  • differential torque arm bolts. Save the large washer. arms. Install the supplied hardware with the large washer
  • 7. 8
  • Re-install the skid plate using the OEM hardware in the Remove the rear wheels. Unbolt the brake line support
  • front and the supplied hardware in the back. The 1/2" tall bracket bolt located on the driver side rear upper trailing
  • spacer goes between the frame and the skid plate. arm
  • 9. 10

Ideal For: Toyota Sequoia (01-07) owners who want a moderate front-and-rear lift with application-specific geometry correction.