Skip to content
BLACK FRIDAY SALE | Save 10% on Orders $150+ with Code: BLACKFRIDAY
BLACK FRIDAY SALE | Save 10% on Orders $150+ with Code: BLACKFRIDAY
Lifted Tacoma, Right-Size Tire: What to Check Before You Order - Iron Ridge Offroad

Lifted Tacoma, Right-Size Tire: What to Check Before You Order

Lifted Tacoma, Right-Size Tire: What to Check Before You Order

A lift kit can give your Tacoma a more confident stance and make room for a larger tire. But “more lift” doesn’t automatically mean “any tire fits.” Wheel width, offset, trim, and suspension configuration all matter, so it pays to work backward from the setup you actually want.

Pick the tire and wheel target first

Before choosing a kit, decide what you want the truck to do. A modest increase in tire size may be all you need for forest roads and weekend trails. A heavier, more aggressive tire can change steering feel, braking, fuel economy, and the load your suspension carries. Be realistic about your daily driving, too—your Tacoma still has to be enjoyable on the way to the trail.

The ReadyLIFT 2.5-inch SST Lift Kit is listed for 2024–2026 Toyota Tacoma models and includes front and rear components. ReadyLIFT states a maximum tire diameter of 285/75 without trimming for this kit. That’s a useful starting point, but it isn’t a universal promise for every wheel and trim combination: confirm the wheel width and offset, and check clearance at full steering lock and suspension travel.

ReadyLIFT 2.5-inch SST Lift Kit for 2024–2026 Toyota Tacoma
ReadyLIFT 2.5-inch SST Lift Kit, listed for 2024–2026 Toyota Tacoma.

Read the exclusions—especially on newer Tacomas

This kit is not listed for Tacomas with rear leaf springs, TRD Pro models, trucks equipped with Adaptive Variable Suspension (AVS), or Trailhunter models. Those exclusions are important: two Tacomas from the same model year can use different suspension setups.

The kit uses fabricated steel front strut spacers, a billet pre-load spacer, and a rear coil spacer. ReadyLIFT recommends professional installation; the listing estimates about four hours. Once installed, an alignment and a careful clearance check help make sure your new setup is ready for real driving, not just a good parking-lot photo.

Your pre-purchase fitment checklist

  • Verify your Tacoma’s model year, trim, drivetrain, and rear suspension type.
  • Check whether your truck has AVS and confirm it is not a TRD Pro or Trailhunter model.
  • Match the tire size with the wheel width and offset you plan to run.
  • Confirm clearance with the seller or installer before ordering, especially if you plan to deviate from ReadyLIFT’s stated no-trim tire size.

The right lift is the one that supports your goals and fits your exact truck. Plan the tire and wheel package first, double-check the exclusions, and you’ll be much closer to a Tacoma build that looks right and works well on the road and trail.

Shop the ReadyLIFT Tacoma 2.5-inch SST Kit

Fitment and tire clearance depend on vehicle configuration and wheel specifications. Confirm compatibility with the product listing, manufacturer, and qualified installer before purchase.

Previous article Can You Use Zone’s 3-Inch Lift on a Bronco HOSS 3.0?
Next article The Bronco Recovery Upgrade You’ll Be Glad You Checked Before the Trail