Skip to content
BLACK FRIDAY SALE | Save 10% on Orders $150+ with Code: BLACKFRIDAY
BLACK FRIDAY SALE | Save 10% on Orders $150+ with Code: BLACKFRIDAY
Zone Offroad ZONF120 lift kit for Ford Bronco HOSS 3.0

Can You Use Zone’s 3-Inch Lift on a Bronco HOSS 3.0?

Short answer: If your Bronco has factory HOSS 3.0 suspension, don’t assume Zone’s 3-inch Sasquatch lift will fit just because you plan to replace the FOX shocks. Zone lists that kit as not compatible with HOSS 3.0 or Bronco Raptor models. Swapping shocks doesn’t change the kit’s stated fitment.

This comes up often with Wildtrak builds: “Can I remove the HOSS 3.0 shocks and use a regular 3-inch lift?” The right answer depends on the exact system. Suspension kits are designed around a combination of shocks, springs, spacers, control arms, and vehicle geometry. A shock swap by itself does not make a kit designed for another Bronco suspension package compatible.

Why HOSS 3.0 fitment needs a closer look

HOSS 3.0 uses FOX 2.5-inch internal-bypass shocks with position-sensitive damping. The shock’s position and operating range are part of how the suspension is designed to work. Zone’s HOSS 3.0-specific lift therefore uses different parts from its 3-inch Sasquatch system.

Zone’s 3-inch Adventure Series kit for Sasquatch Broncos uses strut spacers and Adventure Pro upper control arms. Its product notes specifically exclude HOSS 3.0 and Raptor models. That exclusion still matters if you plan to remove the original shocks: the remaining lift parts are not listed for your suspension package.

Before ordering any Bronco lift, check the exact part number and the manufacturer’s fitment notes for your trim, factory suspension, and door configuration. “Fits 2021–2026 Bronco” by itself is not enough when the vehicle has a specialized suspension.

Zone’s HOSS 3.0-specific option

Zone offers a separate 2.25-inch lift system, part ZONF120, specifically for 2022–2026 Bronco models equipped with HOSS 3.0. It fits 2-door and 4-door models, and Zone says it is designed around the factory FOX shocks. The system combines a top spacer and spring-perch collar to add ride height while keeping the shocks in their intended operating positions. It also includes Adventure Pro upper control arms.

Zone Offroad ZONF120 lift kit for Ford Bronco HOSS 3.0
Zone Offroad ZONF120, designed for 2022–2026 Ford Bronco HOSS 3.0 models.

Zone’s fitment notes also exclude Bronco Raptor and Bronco Sport models, and specify that the Bronco must have a rear sway bar. Verify those details against your vehicle before ordering. A 2023 Wildtrak with HOSS 3.0 is the type of application this dedicated kit is designed for, subject to confirming its configuration.

What if you want to replace the FOX shocks?

If your goal is a taller lift and a different shock setup, shop for a complete suspension system that explicitly lists compatibility with your HOSS 3.0 Bronco. Look for the replacement coilovers or shocks, springs, control arms, and required hardware as a matched package. Confirm the stated lift for your exact trim and Sasquatch status; advertised lift can vary with the factory suspension package.

Don’t choose a kit by lift height alone, and don’t treat “I’m removing the stock shocks” as a fitment confirmation. Ask the kit manufacturer whether the full system is approved for your year, trim, and factory suspension. If the listing says HOSS 3.0 is excluded, get written confirmation before ordering a different configuration.

Before you buy: HOSS 3.0 lift checklist

  • Confirm the Bronco is a full-size model, not a Bronco Sport.
  • Verify whether it has HOSS 3.0, Sasquatch, or another factory suspension package.
  • Check the exact kit part number and the manufacturer’s fitment exclusions.
  • For Zone ZONF120, confirm the vehicle is not a Raptor and has the required rear sway bar.
  • Choose tire size and wheel offset as part of the suspension plan, then check clearance through steering lock and suspension travel.
  • Plan for professional installation and an alignment after changing ride height.

For a HOSS 3.0 Bronco, Zone’s 3-inch Sasquatch kit is not the shortcut to a 3-inch lift. Use a kit built for HOSS 3.0—or select a complete replacement-shock system that confirms your exact application. Review the Zone ZONF120 HOSS 3.0 lift kit and our Ford Bronco lift and suspension guide as you plan your build.

Previous article Ford Ranger Bed Rack: 5 Checks Before You Add a Rooftop Tent
Next article Lifted Tacoma, Right-Size Tire: What to Check Before You Order