Your Offroad Partner.
Your Offroad Partner.
Best starting point for listed Ford Ranger and Bronco applications: ICON Hulse 17x8.5 wheels with 25mm offset. Best for Bronco owners deliberately choosing a more outward wheel position: ICON Hulse 17x8.5 wheels with 0mm offset. This 2026 off road wheels guide compares those specific options, explains their fitment trade-offs, and shows what to confirm before ordering.
A wheel can match your bolt pattern and still be wrong for your truck. Brake clearance, load capacity, center bore, offset, and lug-seat requirements all affect whether the assembly belongs on your vehicle.
Iron Ridge Offroad's off road wheels shortlist is best for Ford Ranger and Bronco owners comparing these two ICON Hulse configurations. For other trucks and SUVs, use the same selection checks rather than treating these recommendations as interchangeable applications.
Start with your exact vehicle details when shopping at Iron Ridge Offroad. A familiar model name is not enough: record the model year, trim, brake package, suspension configuration, and proposed tire before selecting a wheel.
Use these criteria to choose off road wheels in 2026. Appearance comes after compatibility, not before it.
These criteria favor a setup that fits your actual driving over a wheel chosen only for stance. They also prevent a wheel purchase from becoming an unplanned suspension, fender, or spare-carrier project.
Both configurations below specify a 17-inch diameter, 8.5-inch width, and 6x5.5 bolt pattern. Their different offsets serve different clearance and wheel-position goals; neither specification establishes universal fitment.
| Ranked option | Best for | Standout specification | Key limitation |
|---|---|---|---|
| ICON Hulse 8017859057DB | Listed Ranger and Bronco applications evaluating the more inward of these configurations | 25mm offset; listed 5.75-inch backspacing; Double Black finish | Requires confirmation of inner tire, suspension, and brake clearance |
| ICON Hulse 8017858347DB | Listed Bronco applications intentionally choosing more outward wheel placement | 0mm offset; listed 4.75-inch backspacing; Double Black finish | More outward placement requires careful fender and tire-coverage checks |
Read the table as a configuration comparison, not a claim that either wheel clears every tire or suspension package. Before ordering, confirm the manufacturer's current specifications against the exact part number.
The ICON Hulse 8017859057DB is listed for Ford Ranger and Ford Bronco applications. Its specified dimensions are 17x8.5, with a 6x5.5 bolt pattern, 25mm offset, and Double Black finish.
For a compatible daily-driven vehicle, this is the first configuration to evaluate when you do not specifically need the more outward position of the 0mm option. That is a fitment starting point—not a promise of factory-like placement or guaranteed clearance.
Best for: Ranger and Bronco owners whose exact applications are confirmed and who want to evaluate the more inward of these two wheel positions first.
Verdict: Hold until exact fitment is confirmed; buy when the 25mm configuration meets your tire, brake, and clearance requirements.
The ICON Hulse 8017858347DB is listed for Ford Bronco applications. It shares the 17x8.5 dimensions, 6x5.5 bolt pattern, and Double Black finish, but uses 0mm offset.
At equal wheel width, the 0mm configuration positions the wheel 25mm farther outward than the 25mm version. Treat that as a measurable fitment change, not an automatic improvement in trail capability.
Best for: Bronco owners who have confirmed that their tire, suspension, and fender combination calls for the more outward configuration.
Verdict: Hold until outer clearance and coverage are confirmed; skip if appearance is your only reason for changing offset.
Use the part numbers below to keep the two options separate. Iron Ridge Offroad lists both ICON Hulse configurations, but their similar appearance does not make their mounting positions equivalent.
Positive offset places the mounting face toward the wheel's outer face. When width stays the same, reducing positive offset moves the wheel outward; increasing positive offset moves it inward.
For these ICON Hulse options, the practical comparison is inner clearance versus outer clearance. The 0mm wheel moves away from suspension-side components relative to the 25mm version, while also moving closer to the outer bodywork envelope.

Offset also cannot tell you whether a tire clears during suspension compression. A parked vehicle with straight wheels shows only one position, so have the full operating clearance assessed before committing to the combination.
For your 2026 build, write down why you need an offset change. If the answer is only that another truck looks good with it, you have not established a fitment requirement.
Wheel selection and ride comfort are connected through the tire-and-wheel package. Tire construction, inflation pressure, sidewall dimensions, and suspension setup all matter; the wheel's finish tells you nothing about those factors.
A 17-inch wheel does not automatically deliver a comfortable ride. You still need a compatible tire size, an appropriate load specification, and inflation guidance matched to the vehicle and tire.
Keep these trade-offs separate:
Do not choose a larger tire merely because it mounts on the rim. Tire diameter and width still affect clearance, spare storage, and the vehicle systems that depend on tire circumference.
Use this sequence for a 2026 wheel purchase. Send the same information to Iron Ridge Offroad and your installer so everyone evaluates the same configuration.
Record the model year, model, trim, drivetrain, and relevant factory packages. Include brake changes and suspension modifications rather than describing the vehicle simply as lifted or stock.
A Ranger listing is not permission to carry fitment across every Ranger generation. Apply the same discipline to Bronco trims and any other truck or SUV.
Provide the exact tire model and size, including its load designation. Check the tire manufacturer's approved rim-width range against the wheel's 8.5-inch width.
Do not rely on nominal tire width alone. Use the tire manufacturer's dimensional information when checking the proposed assembly.
Verify bolt pattern, center bore, lug-seat shape, stud compatibility, and required hardware. A matching thread size alone does not establish that a lug nut suits the wheel.
Check pressure-monitoring sensor compatibility at the same time. Resolve sensor and valve requirements before tire mounting rather than after the assembly is complete.
Check the wheel's load rating and the manufacturer's application guidance. Then verify brake, steering, suspension, and body clearance for the proposed tire and wheel together.
Do not select spacers as an automatic solution to an unresolved clearance problem. Any additional mounting component needs its own application and installation assessment.
Confirm that the spare arrangement works with your chosen tire diameter, wheel fitment, and vehicle guidance. Include carrier clearance and mounting hardware when the vehicle uses an externally mounted spare.
Give your installer the wheel manufacturer's tightening and follow-up inspection instructions. Use the specified procedures rather than a generic torque value copied from another vehicle.
This 2026 ranking prioritizes application relevance, a clear use case, and the dimensional differences between the two listed ICON Hulse configurations. It is not a strength, weight, or ride-quality test.
The 25mm configuration leads because it gives listed Ranger and Bronco buyers a first option to evaluate without selecting the more outward alternative by default. The 0mm configuration earns a separate slot for Bronco owners whose confirmed fitment goals require that position.
Neither wheel receives a universal recommendation. Manufacturer application guidance, load rating, and clearance checks take precedence over the order of this list.
Start with ICON Hulse 8017859057DB if your listed Ranger or Bronco application checks out and you have no established reason to move farther outward. Choose ICON Hulse 8017858347DB only when the Bronco's complete tire-and-suspension combination supports the 0mm configuration.
For a Chevrolet, GMC, Ram, Jeep, Toyota, or another SUV, do not substitute either wheel based only on diameter or lug count. Find a manufacturer-confirmed application, then apply the same capacity, clearance, hardware, and spare checks.
The best purchase is the wheel that fits the vehicle you drive—not the configuration that creates the longest list of supporting modifications.
What are the best off road wheels for a daily-driven Ranger or Bronco?
ICON Hulse 8017859057DB is the first configuration to evaluate among these two options for listed Ranger and Bronco applications. Confirm exact vehicle compatibility, load rating, brake clearance, and tire fitment before ordering.
Is 0mm offset better than 25mm offset for off-roading?
Neither offset is automatically better for off-roading. At the same wheel width, 0mm offset moves the wheel 25mm farther outward than 25mm offset, changing both inner and outer clearance.
Will these ICON Hulse wheels fit every truck with six lugs?
No, six lugs do not establish wheel compatibility. You must also match the bolt pattern, center bore, mounting hardware, load requirements, brake clearance, and manufacturer application guidance.
Are 17-inch wheels always more comfortable than larger wheels?
No, wheel diameter alone does not determine ride comfort. Evaluate the complete tire size, tire construction, inflation requirements, and suspension setup.
Can I use my factory lug nuts with aftermarket off road wheels?
Use factory lug nuts only when the wheel manufacturer confirms compatibility. Thread size, seat shape, engagement, and tool access all need to suit the wheel and vehicle.
Does a suspension lift guarantee clearance for new wheels and tires?
No, a suspension lift does not establish complete wheel-and-tire clearance. Check steering movement, suspension compression, brake clearance, and the lift manufacturer's wheel requirements.
What information should I send before ordering off road wheels?
Send your model year, vehicle model, trim, brake package, suspension details, and exact tire model and size. Include the proposed wheel part number so the fitment assessment addresses the configuration you intend to buy.
Before ordering your 2026 setup, photograph the existing wheel markings and record where the current tires sit relative to suspension components and fenders. That gives the fitment discussion a useful baseline, although it does not replace a full clearance assessment.
Send the exact wheel part number—not just a product photo. These two ICON Hulse configurations share a finish and dimensions, but their different offsets put the assembly in different positions.